DigitalMedia™ Room Controller Crestron DM-RMC-100
Connectors, Controls & Indicators (Continued)
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
13 LAN3
(1) 8-wire RJ-45 female;
10BaseT/100BaseTX Ethernet
switch port.
14 DMNet5, 6
(1) 4-pin 3.5mm detachable
terminal block, DMNet port;
Connects to DMNet port of a
DM switcher, transmitter, or
other DM device via DM-CBL
or CresCAT-D cable.4
1. Interface connectors for SENS, RELAY, COM and IR ports are provided with
the unit.
2. The DM INPUT port consists of two separate RJ-45 connectors that are labeled
D and M. The D port carries video signal. The M port carries data. Refer to the
tables below, and on the following page, for the wires pin assignments.
D Port
PIN # SIGNAL DESCRIPTION
1 DATA D0+ HDMI Blue
2 DATA D0- HDMI Blue
4 DATA D1+ HDMI Green
5 DATA D1- HDMI Green
7 DATA D2+ HDMI Red
8 DATA D2- HDMI Red
3 CLK- HDMI Clock
6 CLK + HDMI Clock
8 • DigitalMedia™ Room Controller: DM-RMC-100 Operations & Installation – DOC. 6743A