Crestron electronic DM-RMC-100

Crestron DM-RMC-100 DigitalMedia™ Room Controller

Hardware Connections for the DM-RMC-100 (Back View)

LAN:

ETHERNET EQUIPPED

DISPLAY OR OTHER DEVICE

DM INPUT

DMNet

NOTE: Ensure the unit is properly grounded.

NOTE: For optimum performance, Crestron strongly recommends using

DM-CBL DigitalMedia™ cable, available from Crestron. CresCAT-D or

high-quality CAT5e/CAT6 wiring may also be used with varying

performance. Do NOT use low-skew cable.

Operations & Installation – DOC. 6743A DigitalMedia™ Room Controller: DM-RMC-100 • 15

Contents

Main This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Contents Page DigitalMedia Room Controller: DM-RMC-100 Introduction Features and Functions Applications Page Specifications SPECIFICATION DETAILS Physical Description Page DigitalMedia Room Controller Crestron DM-RMC-100 Page Page Page Industry Compliance Setup Network Wiring Installation Page Hardware Hookup Hardware Connections for the DM-RMC-100 (Front View) Page Uploading and Upgrading Establishing Communication Firmware Program Checks Problem Solving Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Check Network Wiring Reference Documents DOCUMENT TITLE Further Inquiries Future Updates Return and Warranty Policies Merchandise Returns / Repair Service 22 DigitalMedia Room Controller: DM-RMC-100 Operations & Installation DOC. 6743A CRESTRON Limited Warranty Operations & Installation DOC. 6743A DigitalMedia Room Controller: DM-RMC-100 23 Crestron Electronics, Inc. Operations & Installation Guide DOC. 6743A