Crestron electronic DM-RMC-100 Uploading and Upgrading

DigitalMedia™ Room Controller Crestron DM-RMC-100

Uploading and Upgrading

Crestron recommends using the latest programming software and that

each device contains the latest firmware to take advantage of the most

recently released features. However, before attempting to upload or

upgrade it is necessary to establish communication. Once communication

has been established, files (for example, firmware) can be transferred to

the device.

Use Crestron ToolboxTM for communicating with the DM-RMC-100;

refer to the Crestron Toolbox help file for details. There is a single

method of communication: indirect communication.

Indirect Communication

SERIAL,

ETHERNET

OR USB

DMNet

PC RUNNING

CRESTRON TOOLBOX DM SWITCHER DM-RMC-100

• DM-RMC-100 connects to a DigitalMedia™ switcher via DMNet.

• Establish communication between the PC and the DM switcher

as described in the latest version of a DigitalMedia Switcher

Operations Guide (Doc. 6755).

• Use the Address Book in Crestron Toolbox to create an entry for

the DM-RMC-100 using the expected communication protocol

(Indirect). Select the Cresnet ID of the DM-RMC-100 and the

address book entry of the control system or DM Switcher that is

connected to the DM-RMC-100.

• Display the DM-RMC-100’s “System Info” window (click the

icon); communications are confirmed when the device

information is displayed.

16 • DigitalMedia™ Room Controller: DM-RMC-100 Operations & Installation – DOC. 6743A