Crown Audio IT9000 HD, I-T5000 HD Advanced Operation, I-TechHD Series Power Amplifiers, page

I-Tech HD Series Power Amplifiers

4 Advanced Operation

4.8.5 Source Configuration

In this screen you can confi gure the levels and settings of the analog, AES and CobraNet inputs. The input signal of each channel can be independently muted.

The I-Tech HD amplifi er can be set to work as a fi xed gain amplifi er: any input signal is given a fi xed amount of gain, either 26dB or 32dB. In addition, you can set the input sensitivity to determine how much gain is provided. See Section 4.8.20 for more details.

4.8.6 CobraNet Advanced Settings

In the CobraNet Advanced Settings screen you can set the parameters shown here. Indicators that are green can’t be modifi ed.

The latency on this screen is the CorbaNet transport latency or buffering. This latency must be set to the same latency as the source CobraNet device.

The Foldback control panel lets you select the items to transmit via CobraNet. Selections available are the Analog Inputs, Amplifi er Outputs or AES input signal. The audio can be routed out through only one bundle.

Operation Manual page 29