Crown Audio Macro-Tech MA-3600VZ Power Amplifier, Operation Manual, page, I. Reset Button

Macro-Tech MA-3600VZ Power Amplifier

4 Operation

4.3 Back Panel Controls

and Connectors

G. Power Cord

H. Stereo/Mono Switch

Allows selection of Stereo, Bridge-Mono, or Parallel-Mono operation.

I. Reset Button

One per channel. Resets the power supply breakers.

J. PIP Module

Standard module (PIP-FX) provides a 3- pin female XLR connector for signal input to each channel.

Input Sensitivity Switch

Located behind the PIP module is the Input Sensitivity switch. See Section 5.3.3 for details.

K.TRS Input Jack

One per channel; female TRS input jacks are provided.

L.Ground Lift Switch

When lifted, inserts an impedance between the sleeve of each TRS jack and the circuit ground to prevent ground loops. Switch has no effect on the input connectors on PIP modules. See Section 5.3.4 for details.

M.XLR Inputs (Standard PIP Module)

One per channel, female XLR input con- nectors are provided.

N.5-Way Binding Post Output Jacks

One pair per channel; accepts banana plugs, spade lugs or bare wire. Note: Bind- ing post outputs on European models come with safety plugs installed to prevent European power-cord plugs from being inserted. The side entry positions for these connectors should therefore be used.

Figure 4.2 Back Panel

Controls and Connectors

Operation Manual page 13