Cub Cadet 8354 manual Specifications, Model

SECTION 6: SPECIFICATIONS

			Model 8354
Maximum PTO Power				28.3 PS
Engine GROSS Power				35 HP
Engine	Model			3A165D
	Type			Indirect injection, water cooled, 4-cycle diesel
	Number of cylinders			3
	Bore and Stroke			3.425 x 3.637 Inches
				(87 x 92.4 mm)
	Total displacement			100.5 cu. in (1,647 cc)
	Rated revolutions			2700 RPM
	Injection timing			18° before T.D.C.
	Injection order			1-2-3
	Compression ratio			22:1
	Lubrication system			Forced Lubrication
	Cooling system			Pressurized radiator, forced circulation with water pump
	Alternator			12V, 50 amps
	Weight (Dry)			394 Lbs. (179 kg)
Capacities	Fuel tank			11.5 Gal. (43.7 L.)
	Engine crankcase			6.1 Qts. (5.8 L.)
	Engine coolant			7.4 Qts. (7.0 L.)
	Transmission case			11.6 Gal. (44 L.)
	Front axle case			2.0 Gal. (7.5 L.)
Dimensions	Overall length (without 3 pt.)			114.1 in.
(with std.	Overall length (with 3 pt.)			126.3 in.
tires)	Overall width (max. tread)			57.1 in.
	Overall height (Top of ROPS)			92.5 in.
	Overall height			59.4 in.
	(Top of steering wheel)
	Wheelbase			65.7 in.
	Ground Clearance			11.4 in.
	Tread width	Front		48.4 in.
	with std. tires	Rear		42.4 - 54.6
Traveling	Clutch			Dry single stage
system	Steering			Hydrostatic steering system
	Transmission			Synchronized shuttle and transmission
				8 forward and 8 reverse speeds
	Brake	Traveling		Wet disc type
		Parking		Connected to traveling brake
	Differential			Bevel gear
Hydraulic	Hydraulic lift control system			Position, Draft, and Mixed control
system	Pump capacity	Main pump		7.8 gal./min. (29.7 L/min.)
		Power strng.		4.7 gal./min. (17.8 L/min.)
	Three point hitch			SAE Category 1
	Maximum lifting capacity			2270 lbs. (1021 kg)
	(at hitch lift point)
	No. or Remote control valve			2 (optional)
	ports

54