•Raise and support the rear of the tractor.
•Adjust the tread widths as shown by changing the mounting relationship of the wheel disc to the rim mounting brackets and/or the relationship of the dish of the wheel disc to the axle. See Figure 48.
Rim Mtg. |
|
|
|
|
|
| ||||
Bracket |
|
|
|
| Rear Axle | Disc - Dish |
| |||
|
|
| ||||||||
Wheel |
|
|
|
| Outward |
| ||||
|
|
|
|
|
| |||||
Disc |
|
|
|
|
|
|
|
|
| |
Rim Mtg. |
| 42.4" | 46.7" |
| ||||||
Bracket |
| |||||||||
| Standard |
|
| |||||||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| Disc - Dish |
|
| ||
|
|
|
|
|
| Inward |
|
| ||
50.3"54.6"
45.9"49.6"
Figure 48
•Torque the nuts to
•Raise the rear of the tractor, remove the supports, and lower the tractor to the ground.
CHECKING STEERING WHEEL
If it is difficult to drive the tractor in a straight line, check the play in the steering wheel. Acceptable steering wheel play is 0.8 to 1.0 inches (20 to 25mm) as measured at the circumference of the steering wheel. If your steering wheel free play exceeds the acceptable range, contact your Cub Cadet dealer to have the tractor inspected.
Acceptable Steering
Wheel Play
0.8 - 1.0 in.
Figure 49
33
