Cub Cadet 8354 manual B. Light Switch, Figure C. Turn Signal Switch, D. Hazard Lamp Switch

Models: 8354

1 56
Download 56 pages 36.78 Kb
Page 13
Image 13
B. Light Switch

B. Light Switch

Turn the light switch one click clockwise to illuminate the low beam headlights and the taillights.

Turn the light switch one more click clockwise to illuminate the high beam headlights. See Figure 3.

High

Low Beam

Beam

TURN SIGNAL

 

 

 

LIGHT

 

SWITCH

SWITCH

 

 

 

Figure 3

C. Turn Signal Switch

Use the switch lever to activate one of the rear amber lights and hazard lights in a blinking mode to indicate a turn in that direction. Refer to Figure 3.

Lever downward — Le ft light flashes Lever upward — Right light flashes

D. Hazard Lamp Switch

Use to turn on the two amber hazard lights located on top of the rear fender in the flashing mode. Refer to Figure 4.

Pull the switch outward to activate amber lights.

Push in to turn off.

E. PTO Switch

Use this switch to engage and disengage the 540 RPM rear PTO shaft. See Figure 4.

The PTO switch has three positions as follows:

OFF Position — Center position of switch. Stops the rotation of the rear PTO shaft.

NOTE: The PTO switch must be placed in the OFF position before starting the engine. The engine starter motor will not engage if the PTO switch is not in the OFF position.

AUTOMATIC Position — Turn top of switch to left. The PTO will operate only when the 3-point hitch and its mounted implement are lowered using the position control lever.

MANUAL Position — Turn top of switch to right. The PTO will operate continuously until the switch is returned to the OFF position.

 

 

TILT LOCK

 

HAZARD

 

 

 

LEVER

 

LAMP

 

 

 

 

SWITCH

 

 

 

 

Off

Auto.

Manual

PTO SWITCH

Figure 4

F.Steering Tilt Lock Lever

Use this lever to lock the steering wheel in the tilt position selected by the operator. See Figure 4.

To reposition the steering wheel proceed as follows:

Grasp the handle of the lever and push inward.

Rotate the lever counterclockwise to loosen.

Adjust the position of the steering wheel.

Push the handle inward and rotate clockwise until tight to lock the steering wheel.

Pull the handle outward.

WARNING: Make sure the steering wheel is locked before driving the tractor. Never adjust the steering wheel while in motion.

G. Parking Brake Lever

Use this lever, located below the dash panel to the right of the steering column, to set the parking brake before dismounting the tractor. See Figure 5.

Engage Figure 3

PARKING

BRAKE D. Hazard Lamp Switch

LEVER

Brake

PedalsE. PTO Switch

Locked

Figure 5

13

Page 13
Image 13
Cub Cadet 8354 B. Light Switch, Figure C. Turn Signal Switch, D. Hazard Lamp Switch, E. PTO Switch, G. Parking Brake Lever