Cub Cadet Tank S S7232D manual 23

Reconfigurable Mower

		Inner	Discharge	Cutting	Gauge	Front	Rear
	Front Skirt	Baffle	Baffle	Blades	Wheels	Roller	Rollers
Standard set-up	Low	Installed	Installed	Hi-lift	Low = 3	Low = 3	Low = 3
					to 5”	to 5”	to 5”
					High = 1 to	High = 1 to	High = 1 to
Stems (Dandelion, Bahia,	Med	Removed	Installed	Hi-lift	2-1⁄2”	2-1⁄2”	2-1⁄2”
Buckhorn, etc.)					Low = 3	Low = 3	Low = 3
					to 5”	to 5”	to 5”
					High = 1 to	High = 1 to	High = 1 to
Very Lush &/or tall grass	High	Removed	Installed	Hi-lift	2-1⁄2”	2-1⁄2”	2-1⁄2”
					Low = 3	Low = 3	Low = 3
					to 5”	to 5”	to 5”
Low cut height (1 to 2”)	Med	Installed	Installed	Low-lift	High = 1 to	High = 1 to	High = 1 to
					2-1⁄2”	2-1⁄2”	2-1⁄2”
					High = 1 to	High = 1 to	High = 1 to
Mulch	Low	Installed	Removed	Hi-lift/	2-1⁄2”	2-1⁄2”	2-1⁄2”
				Mulch	Low = 3	Low = 3	Low = 3
					to 5”	to 5”	to 5”
					High = 1 to	High = 1 to	High = 1 to
Material collection	Low	Installed	Installed	Hi-lift	2-1⁄2”	2-1⁄2”	2-1⁄2”
					Low = 3	Low = 3	Low = 3
					to 5”	to 5”	to 5”
					High = 1 to	High = 1 to	High = 1 to
Abrasive (sandy), dry	Low	Removed	Installed	Low-lift	2-1⁄2”	2-1⁄2”	2-1⁄2”
					Low = 3	Low = 3	Low = 3
					to 5”	to 5”	to 5”
					High = 1 to	High = 1 to	High = 1 to
Wet	Low	Installed	Installed	Hi-lift	2-1⁄2”	2-1⁄2”	2-1⁄2”
					Low = 3	Low = 3	Low = 3
					to 5”	to 5”	to 5”

Table Notes: This table is a general outline of suggested settings, mowing conditions may vary.

Front Skirts: When the front skirt is set to “low” the grass lift is increased for precision cutting. When the skirt is set to “high” the grass can “rebound” and higher volumes of grass can be cut.

Inner Baffle: The inner baffle regulates grass discharge. Remove the inner baffle for high-volume grass and install the inner baffle for precision cutting.

Discharge Baffle: The discharge baffle enhances the grass discharge pattern. The discharge baffle reduces clumping and should be removed for mulching.

Gauge Wheels: The gauge wheels reduce scalping, help with precison cutting and reduce turf defacement during turns.

Rear Rollers: The rear rollers reduce scalping and gives grass a striped appearance.

Cutting Blades: The cutting blades cut grass, create grass lift and discharge grass through the discharge chute.

Discharge Chute: The discharge chute controls the mower deck discharge and enhances the discharge pattern

NOTE: To avoid damaging grass, no more than 1⁄3 of the grass height should be removed during a single cutting (i.e. if the grass is 6” tall, cut it to 4”).

Section 5 — Operation 23