Cuisinart DCC-2000 Programming Your Coffeemaker, Making Coffee, To Brew Coffee, 1 - 4 Cup Setting

PROGRAMMING YOUR COFFEEMAKER

TO BREW COFFEE

1.Turn the function knob to “Brew.”

2.Turn the On/Off knob to “On” and release. The red “On” indicator light will illuminate and brew cycle will begin.

TO TURN THE COFFEEMAKER OFF

Simply turn the On/Off function knob to “Off” and release.

NOTE: To program the coffeemaker to shut off automatically, see To program the Variable Auto Off instructions below.

PROGRAMMING YOUR COFFEEMAKER FOR DELAYED BREW TIME

To set the time:

1.Turn the function knob to “Clock”.

a.Set Hour: Press and hold the “Hour” button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct hour, the default will be the last time set unless power is shut off.

NOTE: When the number count passes 12, the PM light will be displayed on the LCD.

b. Set Minutes: Press and hold the “Minute” button to scroll through numbers quickly. When number displayed approaches the desired setting, press and release (pulse) the button to advance one digit at a time. After setting the correct minute, the default will be the last time set unless power is shut off. To finish setting time, turn the FUNCTION KNOB to any other setting or simply wait until the numerals stop blinking.

To program the Auto On (brew start time)

1.Turn the function knob to “Prog.”

2.Set the time you want coffee to begin brewing by using the minute and hour push-buttons. Follow the same instructions you used to set the time of day, in the

To set the time section above.

3.Turn the function knob to “Auto On.” LCD will display the current time.

4.Turn the On/Off knob to “On” and release. The green indicator light will come on to remind you that the programming function is in use. At the programmed time, the red indicator will come on as well, indicating that the brew cycle is starting. Both lights will go off when keep warm cycle ends.

NOTE: To reactivate the auto-on feature to start brew cycle at the same time another day, simply turn the On/Off function knob to “On” and release. The green “auto-on” light will illuminate.

To program the Variable Auto Off:

1.Turn the function knob to “Auto Off.” Press and hold the “Hour” button for 2 seconds. The clock display will start blinking.

2.Program the coffeemaker to shut off from zero to four hours after brew cycle is finished by using the “Hour” and “Minute” buttons (see “To set the time”).

1 - 4 Cup Setting:

The 1- 4 cup setting button is used when you make small amounts of coffee. The

1-4 setting basically ‘double heats’ the water, making your smaller amount piping hot.

To use: When making a smaller amount, press the 1-4 button on the control panel after turning on the unit.

Power Loss Back-up

One-minute protection in case a breaker trips, the unit is unplugged, or the power fails.

It holds all programmed information, including time of day, auto on time and auto off time.

MAKING COFFEE

Before you make the first batch of coffee in your new Cuisinart® Coffee On Demand™ Coffeemaker, we recommend operating

the coffeemaker once using only water and a paper filter. This will remove any dust or residues that remain in the system from the manufacturing process.

1.Insert the Water Filter:

a.Remove the filter from polybag and soak in cold tap water for 15 minutes.

b.Remove the water filter holder from

7