Perle Systems 5500208-41 manual Line-access, Phone-number, Service, Sess-timer

Configuring Users

line-access

Specifies the user access rights to each IOLAN device line. Options are:

zRead/Write—Users are given read and write access to the line.

zRead In—Users are given access to read only outbound data, data that is going from the IOLAN to the device.

The onoff option is only for 1-port models. You can disable line access in 2-port + models by specifying 0 (zero).

phone-number

The phone number the IOLAN will dial to callback the user (you must have set Callback to On). Enter the number without spaces.

port

When the User Service is Telnet, this is the target port number. The default value will change based on the type of Service selected; the most common known port numbers are used as the default values.

service

The type of service that the user will use.

sess-timer

The amount of time, in seconds, that the Session Timer will run. Use this timer to forcibly close a user’s session (connection). When the Session Timer expires, the IOLAN will end the connection. The default value is 0 (zero), meaning that the session timer will not expire (the session is open permanently, or until the user logs out). The maximum value is 4294967 seconds. The User Session Timer will override the Line Session Timer, with the exception of reverse Telnet sessions.

34 IOLAN DS1/TS2 CLI Reference Guide, Version 4.1