Set IOChannel Multihost, Kill IOChannel | Perle Systems 5500208-41

Set IOChannel

Set IOChannel Multihost

Description	Configures up to 49 hosts/IOLANs that the Digital input channel or input serial signal
	pins (DSR, DCD, or CTS-when the line is configured for signal-io) will connect to. To
	see a list of configured hosts/IOLANs, enter the show iochannel <channel>
User Level	command.
User Level	Admin
Syntax	set iochannel <channel> multihost entry <number> delete
	set iochannel <channel> multihost entry <number> host <host_name>
	<tcp_port>
Options	<channel>
	Specify the Digital input channel or input serial signal pin that will be connecting to all
	the hosts/IOLANs in the multihost list.
	entry
	Specify the multihost table entry number. Valid values are 1-100.
	delete
	Deletes the entry number in the multihost table.
	host
	Specify the preconfigured host that will be in the multihost list.
	Default: None
	<tcp_port>
	Specify the TCP port that the I/O channel or serial signal pin will use to communicate
	to the Host.
	Default: 0

Show IOChannel Status

Description	Shows the I/O channel status for all channels and the serial signal pins (when the line is
User Level	configured for signal-io).
User Level	Admin
Syntax	show iochannel status

Kill IOChannel

Description	Kills the I/O channel.
User Level	Admin
Syntax	kill iochannel <i/o_channel>
	kill iochannel line <number> rtsctsdtrdsrdcd
Options	i/o_channel
	Specify the channel number, for example, d2 or a4. Temperature models use Analog
	input, so the channel numbers are a1-a4.
	rtsctsdtrdsrdcd
	Specify the Digital output pins (RTS or DTR) or Digital input pins (CTS, DSR, or
	DCD).

90	IOLAN DS1/TS2 CLI Reference Guide, Version 4.1

Image 90

Perle Systems 5500208-41 manual Set IOChannel Multihost, Show IOChannel Status, Kill IOChannel

Contents

Iolan DS1/TS2 EN 55022 1998, Class A, Note Table of Contents User Commands Line Commands Network Commands Time Commands Statistic Commands Channel Control Commands Glossary Iolan DS1/TS2 CLI Reference Guide, Version Preface About This BookIntended Audience Contacting Technical Support Making a Technical Support Query Repair Procedure Feedback on this Manual Contacting Technical Support Introduction Command SyntaxIntroduction CLI Conventions Command Shortcuts Command Options Set Custom-App Server CommandsServer Commands Set Server Oem-login Bypass-passwordDhcp/bootp Password-limit Prompt-with-name Set ServiceTimeout Single-telnet Hardware Commands Modbus Commands Set Modbus Gateway Set TruePort Remap-Baud TruePort Baud CommandsUser Level Admin Show TruePort IPv6 Commands Set IPv6Show IPv6 Add Custom-IPv6 Set Custom-IPv6 Delete Custom-IPv6 Range Default 64 method manualRange Default Field Format IPv6 address prefix-bits manual IPv6 Commands User Commands Commands for Users Logged Into the Iolan Resume MenuPing Screen Set User Set User Session Show Sessions Show Line UsersSyslog Console Show Termtype Telnet Tcpport Version Configuring UsersSet Default User Add User Hotkey-prefix Level Sess-timer Line-accessService Phone-number Set User Level Show the settings for the specified user Show Default UserConfigureduser Show the settings for the current user Configuring Users Line Commands Line CommandsPort vs -Port Line Commands Set Line Options break Break-delayDial-timeout Break-length Initiate-connection Data-logginInitial Internet-address Default 10 ms ResetDefault Disabled Session strings Lock Stop-bits Term-typeTerm1, Term2, Term3 user defined terminals User Set Line Interface Set Line Service ConfighostServerport Hostport Set Modem ModemnameInitstring Line Service Commands Show Line Set Telnet-Client Options termtype Startipaddress Set UDPOutboundport Endipaddress Set Vmodem Set Vmodem-Phone Set Modbus-Slave Line Set Modbus-Master LineIPaddress Set Multihost Line Set Line Initiate-Connection Show UDP Show InterfaceShow Telnet-Client Show Vmodem Delete Modem Modem CommandsAdd Modem Show Modems Packet Forwarding Commands Set Packet-Forwarding Line Enable-end-eof1 Enable-end-trigger1Enable-end-trigger2 Enable-end-eof2 Show Packet-Forwarding Line Packet Forwarding Commands Add Community Network Commands ChapterSnmp Commands Add Trap Set Snmp Delete CommunityDelete Trap Show Snmp Tftp Commands Hosts Commands Add Gateway Gateway CommandsShow Hosts Delete Gateway Show Gateways Description Configures the gateway User Level Admin SyntaxSet Gateway Destinationip Logging Commands Set SyslogShow Syslog Time Commands Time CommandsTime/Date Setting Commands Show Date Administration Commands Bootup Commands Configuration file Set BootupShow Bootup Show ARP Hostname/ipaddress Tftp File Transfer CommandsNetload Filename Netsave Custom Factory DefaultOptions Factory-default-config Table or a DNS server Set Motd Motd CommandsSet Show Motd Motd Commands Show Netstat Statistic Commands ChapterConfiguration Statistics Show Modbus Statistics Run-Time Statistics O Commands Global I/O CommandsSet IO UDP Set IO Failsafe Set IO Temperature-ScaleSet Line Set IO Modbus Set IOChannel Digital I/O Set IOChannel ModeSet IOChannel Set IOChannel Digital Input Set IOChannel Digital Input Serial Pins Description can be up to 20 characters Current status. The default is disabledSet IOChannel Digital Output Will be displayed as active Active-to-inactive-delay Active-signal-widthInactive-signal-width Inactive-to-active-delay Options description Set IOChannel Digital Output Serial PinsSet IOChannel Relay Relaynumber Set IOChannel Analog True Analog Options analogchannel Clear-mode Trigger-typeTrigger-level Clear-level Set IOChannel Analog Temperature Level Set IOChannel IOExtension EnabledDefault Disabled keepalive Options channel Server-initiated tcp-port Client-initiated tcp-portClient-initiated multihost Local-connection inputchannel Kill IOChannel Set IOChannel MultihostShow IOChannel Status Channel Show IO Show IOChannel Digital Input Channel Control CommandsDigital Output Relay Glossary