Set Line, Set IO Failsafe, Set IO Modbus | Perle Systems 5500208-41

Set Line

Set IO Failsafe

Description	Sets the failsafe (watchdog) settings for I/O.
User Level	Admin
Syntax	set io failsafe [mode onoff] [timeout <seconds>]
Options	mode
	Enables/disables the Failsafe Timer. This is the global setting that must be enabled to
	set the Failsafe Action on the channel for digital outputs and relays. When this timer
	expires because of no I/O activity within the specified time interval, the Failsafe Action
	set for the channel determines the action on the output.
	timeout
	The number of seconds that must elapse with no I/O activity before the channel
	Failsafe Action is triggered. Valid values are 1-9999. The default is 30 seconds.

Set IO Modbus

Description	Enabling the Modbus option makes the IOLAN act as a Modbus Slave, allowing
User Level	Modbus Masters to communicate with the IOLAN to control and/or retrieve I/O data.
User Level	Admin
Syntax	set io modbus [mode onoff] [uid <1-255>]
Options	mode
	Enables/disables the ability to control/monitor I/O channels using the Modbus protocol.
	uid
	This is the UID you are assigning to the IOLAN, which is acting as a Modbus slave.

Set IO Temperature-Scale

Description	Sets the temperature scale that will be used for all Temperature input readings.
User Level	Admin
Syntax	set io temperature-scale celsiusfahrenheit
Option	temperature-scale
	Select the temperature scale that will be used to display temperature data, either
	Fahrenheit or Celsius. The default is Celsius.

Set Line

Set Line Service

Description Sets the Line Service settings to signal I/O. When the line service is set to signal-io, you also have the option of enabling the I/O extension for the serial singal pins. See Set IOChannel IOExtension on page 88 for more information.

User Level Admin

Syntax set line <number> service signal-io

Option signal-io

Sets the line to use signal I/O. You still need to define the serial pins for digital input (CTS, DSR, or DCD) or digital output (RTS or DTR). See Set IOChannel Digital Input (Serial Pins) on page 80 or Set IOChannel Digital Output (Serial Pins) on page 83 for configuration options.

78	IOLAN DS1/TS2 CLI Reference Guide, Version 4.1

Image 78

Perle Systems 5500208-41 manual Set Line, Set IO Failsafe, Set IO Modbus, Set IO Temperature-Scale

Contents

Iolan DS1/TS2 EN 55022 1998, Class A, Note Table of Contents User Commands Line Commands Network Commands Time Commands Statistic Commands Channel Control Commands Glossary Iolan DS1/TS2 CLI Reference Guide, Version Preface About This BookIntended Audience Contacting Technical Support Making a Technical Support Query Repair Procedure Feedback on this Manual Contacting Technical Support Introduction Command SyntaxIntroduction CLI Conventions Command Shortcuts Command Options Set Custom-App Server CommandsServer Commands Set Server Oem-login Bypass-passwordDhcp/bootp Password-limit Prompt-with-name Set ServiceTimeout Single-telnet Hardware Commands Modbus Commands Set Modbus Gateway Set TruePort Remap-Baud TruePort Baud CommandsUser Level Admin Show TruePort IPv6 Commands Set IPv6Show IPv6 Add Custom-IPv6 Set Custom-IPv6 Delete Custom-IPv6 Range Default 64 method manualRange Default Field Format IPv6 address prefix-bits manual IPv6 Commands User Commands Commands for Users Logged Into the Iolan Resume MenuPing Screen Set User Set User Session Show Sessions Show Line UsersSyslog Console Show Termtype Telnet Tcpport Version Configuring UsersSet Default User Add User Hotkey-prefix Level Sess-timer Line-accessService Phone-number Set User Level Show the settings for the specified user Show Default UserConfigureduser Show the settings for the current user Configuring Users Line Commands Line CommandsPort vs -Port Line Commands Set Line Options break Break-delayDial-timeout Break-length Initiate-connection Data-logginInitial Internet-address Default 10 ms ResetDefault Disabled Session strings Lock Stop-bits Term-typeTerm1, Term2, Term3 user defined terminals User Set Line Interface Set Line Service ConfighostServerport Hostport Set Modem ModemnameInitstring Line Service Commands Show Line Set Telnet-Client Options termtype Startipaddress Set UDPOutboundport Endipaddress Set Vmodem Set Vmodem-Phone Set Modbus-Slave Line Set Modbus-Master LineIPaddress Set Multihost Line Set Line Initiate-Connection Show UDP Show InterfaceShow Telnet-Client Show Vmodem Delete Modem Modem CommandsAdd Modem Show Modems Packet Forwarding Commands Set Packet-Forwarding Line Enable-end-eof1 Enable-end-trigger1Enable-end-trigger2 Enable-end-eof2 Show Packet-Forwarding Line Packet Forwarding Commands Add Community Network Commands ChapterSnmp Commands Add Trap Set Snmp Delete CommunityDelete Trap Show Snmp Tftp Commands Hosts Commands Add Gateway Gateway CommandsShow Hosts Delete Gateway Show Gateways Description Configures the gateway User Level Admin SyntaxSet Gateway Destinationip Logging Commands Set SyslogShow Syslog Time Commands Time CommandsTime/Date Setting Commands Show Date Administration Commands Bootup Commands Configuration file Set BootupShow Bootup Show ARP Hostname/ipaddress Tftp File Transfer CommandsNetload Filename Netsave Custom Factory DefaultOptions Factory-default-config Table or a DNS server Set Motd Motd CommandsSet Show Motd Motd Commands Show Netstat Statistic Commands ChapterConfiguration Statistics Show Modbus Statistics Run-Time Statistics O Commands Global I/O CommandsSet IO UDP Set IO Failsafe Set IO Temperature-ScaleSet Line Set IO Modbus Set IOChannel Digital I/O Set IOChannel ModeSet IOChannel Set IOChannel Digital Input Set IOChannel Digital Input Serial Pins Description can be up to 20 characters Current status. The default is disabledSet IOChannel Digital Output Will be displayed as active Active-to-inactive-delay Active-signal-widthInactive-signal-width Inactive-to-active-delay Options description Set IOChannel Digital Output Serial PinsSet IOChannel Relay Relaynumber Set IOChannel Analog True Analog Options analogchannel Clear-mode Trigger-typeTrigger-level Clear-level Set IOChannel Analog Temperature Level Set IOChannel IOExtension EnabledDefault Disabled keepalive Options channel Server-initiated tcp-port Client-initiated tcp-portClient-initiated multihost Local-connection inputchannel Kill IOChannel Set IOChannel MultihostShow IOChannel Status Channel Show IO Show IOChannel Digital Input Channel Control CommandsDigital Output Relay Glossary