Garland MP-GD-10-S, MP-GS service manual Oven Temperature Probe Service/Removal

Models: MP-GS MP-GD-10-S

1 80
Download 80 pages 53.4 Kb
Page 58
Image 58

SERVICE PROCEDURES (REMOVAL/REPLACEMENT)

8. Test door switch activation / operation as indicated in the diagnostic checks..

9. If the door switch assembly requires adjustment, position the door to the full close position.. Loosen the assembly mount screws just enough to set the switch stricker arm rollers at a position where there is no pressure on the rollers at either cam surface..

10. At that point, tighten the switch assembly bracket screws.. 11.. Run the door position diagnostic check again..

6.Use a clean dry cloth to hold the new light, DO NOT TOUCH NEW LIGHT WITH YOUR FINGERS..

7.Install the replacement light..

8.To reassemble, reverse above instructions. Ensure that the cavity light wires on the RIGHT side of the oven are re- connected

Door Micro Switch Service / Removal /

Replacement And Adjustment

Note: Disconnect electrical power from the oven.. 1 Open the oven door..

2.Locate and remove the 2 machine screws located in the upper LEFT side of the cavity frame.. (These screws are just RIGHT of the upper door post on the cavity door frame..)

Door Switch adjustment screws

3Remove both screws.. DO NOT TOUCH THE COUNTERSINK SCREW..

4.Remove the 2 screws holding the door micro switch cover.. This is located on the front LH side of the oven top panel..

5.Upper switch on bracket is SW2, lower switch is SW1..

6 Replace required micro switch..

7.Reinstall door switches and bracket and screws.. Page 58

Oven Temperature Probe Service/Removal

The probe is located on the interior RIGHT rear side of the oven cavity..

1.To first gain access to the temperature probe, remove the oven racks, rack support guides and bafflflle plate.. Remove the 2 screws holding the probe in place.. DO NOT REMOVE THE PROBE at this point..

2.Remove the 2 screws holding the probe in place..

3.DO NOT REMOVE THE PROBE at this point..

Note: The wires for the probe are located behind the RIGHT side panel..

Part # MPSM07 (03/24/08)

Page 58
Image 58
Garland MP-GD-10-S, MP-GS Oven Temperature Probe Service/Removal, Remove both screws.. do not Touch the Countersink Screw

MP-GS, MP-GD-10-S specifications

The Garland MP-GD-10-S and MP-GS are innovative electric pizza ovens designed for commercial applications, particularly in restaurants, pizzerias, and cafes. These ovens combine advanced technology with user-friendly features to deliver high-quality pizza quickly and efficiently.

One of the standout features of the Garland MP-GD-10-S is its dual-deck design, allowing operators to prepare two separate pizzas at once. This is a significant advantage during peak hours, as it enhances productivity without compromising quality. The MP-GS model boasts a similar configuration, promoting efficient cooking while also providing versatility in menu offerings.

Both models are equipped with powerful heating elements that ensure rapid heat-up times and consistent cooking temperatures. This technology is crucial for achieving the perfect pizza crust, as it facilitates even heat distribution across the cooking surface. The ovens also feature adjustable temperature controls, allowing users to tailor the cooking environment according to specific recipes or customer preferences.

The Garland MP-GD-10-S and MP-GS come with durable stainless steel exteriors, which not only contribute to an appealing aesthetic but also ensure easy cleaning and maintenance. The removable crumb tray further simplifies the cleanup process, allowing operators to focus on their culinary creations rather than time-consuming maintenance tasks.

Another notable characteristic of these ovens is their user-friendly controls. The intuitive interface allows staff to operate the ovens with minimal training, reducing the likelihood of errors and enhancing overall efficiency in the kitchen. Additionally, both models utilize a reliable digital timer for precise cooking times, ensuring that each pizza is cooked to perfection.

In terms of safety, the Garland MP-GD-10-S and MP-GS are equipped with sturdy door hinges and double-walled construction, promoting temperature retention and preventing exterior overheating. This design not only enhances safety in the kitchen but also optimizes energy efficiency, making them economical choices for busy food establishments.

Overall, the Garland MP-GD-10-S and MP-GS are exceptional electric pizza ovens that embody cutting-edge technology and practical design. Their combination of productivity, user-friendliness, and durable construction makes them a valuable addition to any commercial kitchen, catering to the demands of fast-paced culinary environments while ensuring top-notch pizza quality. Whether for a bustling pizzeria or a cozy cafe, these ovens are tailored to meet the needs of today’s food service professionals.