Garland MP-GS High Fan, Low Fan, Pulse Fan, Cook/Hold, Start/Cancel, Program, Numeric Keys, Enter

High Fan

Pressing this key once will change the fan mode to high speed.. The LED will light as a visual indicator that the fan is operating at high speed..

Low Fan

Pressing this key once will change the fan mode to low speed.. The LED will light as a visual indicator that the fan is operating at low speed..

Pulse Fan

Pressing this key once will change the fan mode to pulse.. The LED will light as a visual indicator that the fan is operating in pulse mode..

In Pulse mode, the fan operates at low speed and is turned on and off at 30 second intervals after the programmed temperature is reached..

Note: during pulse mode, the fan will be on continuously during initial start-up.. After the oven has reached the programmed temperature, the fan will begin to pulse on and off.. While the fan is pulsing, the heat will only be active while the fan is on.. If the temperature probe calls for heat while the fan is off, the control will not activate the heat output until the fan turns on.. Moisture can not be injected manually during operation in Pulse Mode..

Cool Down

At any time the oven temperature is above 150°F, the oven can be cooled by pressing this button.. The heat will turn off, the fan will switch to high speed and the display will change to indicate that the oven is in Cool Down mode..

When the oven is shut off for the day by pressing the On/Off key, if the cavity temperature is above 200°F, Cool Down will automatically start.. The fan will run at the high speed setting.. The display will indicate “Auto Cool Down..”This cools the oven to 150°F to help extend the motor life..

Cook/Hold

Pressing this key activates the Hold feature.. At the end of the cooking cycle, the oven will continue to idle at the programmed HOLD temperature, holding the oven’s contents at the desired temperature until serving..

Start/Cancel

Pressing this key begins or ends a cook cycle.. When in the idle mode, pressing the key once will activate the timer to the last programmed time period.. The display timer will count down the time remaining..

At the end of the cook cycle, an audible alarm will sound.. Pressing this key once will cancel the alarm..

To cancel a cooking cycle in progress, press and hold the key for three seconds.. The timer will stop and the oven will return to idle mode..

Program

Pressing this key enters the Program Mode.. In Program Mode, various key/display combinations allow the user to program oven control functions and to input/assign time, temperature and moisture parameters to recipe keys..

1.Press and hold the Program key for 3 seconds.. The display will indicate ENTER CODE.. Here, a pass code must be entered.. This security feature prevents unauthorized persons from changing recipe parameters..

2.Use the number key to enter 4 – 2 – 7 – 5.. Then press the Y/Enter key..

3.Press the N/Scroll key to select a recipe or system programming..

Numeric Keys

Use these keys to enter numeric values when programming the oven functions and/or recipe keys..

“N”/Scroll

During programming, the user will be required to answer yes or no to a question asked.. This key is used to input a “no” answer.. On other occasions, this key will be used to scroll through a list of choices..

“Y”/Enter

During programming, the user will be required to answer yes or no to a question asked.. This key is used to input a “yes” answer.. On other occasions, this key will be used to enter a selection from a list of choices..

Part # MPSM07 (03/24/08) Page 19