Philips DVDR612/97 user manual Programming recordings with the ShowView System, Cancel

Timer Recording (cont’d)

Programming recordings with the ShowView® System

With this programming system, you only need to enter the ShowView® programme number as all the information needed by the DVD recorder for programming is contained in the programming number.

1Turn on the TV power. Select the correct Video In channel at the TV.

2Press TIMER on the remote control. ➜ The timer overview appears.

TIMER				11.55
TIMER OVERVIEW			TIMER DETAILS
10:55	CNBC	Weekly	Start time	12:00
23:45	Disco	12.04	Stop time	18:05
21:00	BBC2	Daily	Date	15:07:2004
06:00	HBO	16.04	Repeat	Once
08:00	ABC	13.04	Channel	199 BBC24
			VPS	DVD HQ
			Record Mode	Off
Delete	New Timer		Change	ShowView

3Press the matching colour coded button on the remote control to select

{ShowView }.

➜The ShowView® entry screen appears.

TIMER MENU 12.55

ShowView system

Clear Store Cancel

4Use the alphanumeric keypad 0-9 to enter the ShowView® code.

(e.g.,: 5-312-4 or 5,312 4, key in ‘53124’). ➜ This number is up to 9 digits long and can be found next to the start time of the TV programme in your TV listings magazine.

●To clear the ShowView® entry, press the matching colour coded button on the remote control to select { Clear }.

●To cancel the ShowView® programming, press the matching colour coded button on the remote control to select

{Cancel }.

➜The timer overview appears.

5Press OK to confirm, then press the matching colour coded button on the remote control to select { Store }.

➜ The system will store the timer entry and return to the timer overview screen.

●If the information is missing or not available, you may be asked to enter more information. Follow the instructions on the TV.

●If you want to make changes, use

3 4 1 2 to select the appropriate entry field. If required, make changes using 3 4 or the alphanumeric keypad 0-9.

6To exit, press TIMER.

7Insert a DVD+R(W).

8Press STANDBY-ONto switch off the DVD recorder.

➜The DVD recorder must be in standby mode in order for the timer recording to occur. If not, a warning message will appear ten minutes before the recording starts.

➜If you ignore the warning message, the DVD recorder will switch to standby mode automatically before the programmed recording begins.

➜The 'TIMER’ icon will light up on the display panel if a timer recording is set.

E n g l i s h

TIPS: To play a DVD+R on other DVD players, see “Finalising disc (DVD+R)”.

During timer recording, press STANDBY-ONwill stop recording.

43

3139 246 13454

1DVDR6xx_Eng00_13454c 43 9/28/04, 1:26 PM