E n g l i s h
Installing the DVD Recorder (cont’d)
Note: Make sure you have successfully | Helpful Hints: |
made all the required connections to the | – If the DVD recorder cannot find any TV |
DVD recorder, the TV and Satellite | stations, select programme number {1} on |
Receiver/Cable Box (if any) and switched | the TV set or check the cable connection |
them on. The automatic channel search | from the antenna socket to the DVD |
will detect the signals and save all the | recorder and TV set. |
available programme channels. | – If the sound or picture is distorted on any |
0 Press OK again to start automatic TV | of the stored TV channels, see pages 23~27 |
“TV channel programming” for manual TV | |
channel search. | search or |
➜The automatic search may take 15 minutes.
!When TV channel search complete, press OK to continue.
➜The { Time and Date } menu appears on the TV.
TIME AND DATE
Check time and date and correct if necessary
Time 09:00
Date | 26.06.2004 |
Done OK
"Check if the information on the menu is
correct.
➜ If required changes, follow steps 4~8 of “Setting the time and date” on page 27.
§Press 4 to select { Done } and press OK to save the changes.
➜The first installation is now complete.
➜The first tuned TV channel appears.
The DVD recorder is ready for use!
TIPS: Press OK to exit the initial installation menu.
Press RETURN to go back to previous menu item.
22
3139 246 13454
1DVDR6xx_Eng00_13454c | 22 | 9/28/04, 1:25 PM |