Philips DVDR612/97 user manual Troubleshooting cont’d, Problem, Solution, E n g l i s h

Models: DVDR612/97

1 74
Download 74 pages 6.57 Kb
Page 65
Image 65
–If the DVD recorder cannot read the disc, you cannot record.

Troubleshooting (cont’d)

Problem

Recordings are not occurring as scheduled. New recordings cannot be made.

The wrong TV channel was decoded (recorded) after you programmed a recording using the ShowView system.

A DVD+RW or DVD+R recorded on this DVD recorder will not play on a DVD player.

Solution

The TV channel you want to record is not stored or you selected the wrong programme number. Check TV channels stored.

If you adjust the clock after you set a timer recording, reset the timer recording.

If the DVD recorder cannot read the disc, you cannot record.

You cannot use the DVD recorder to duplicate copyrighted materials (DVDs or videotapes) onto a DVD+RW/+R, “COPY PROTECT” will be displayed.

A finalised DVD+R has been inserted. Change disc.

‘VPS/PDC’ is turned on but ‘VPS/PDC time’ is wrong. Enter the exact ‘VPS/PDC time’.

1)Enter the ShowView programming number of the desired TV channel.

2)Press OK to confirm.

3)Check the channel number in the {Ch.} input field. If this does

not correspond to the desired TV channel, select this entry field and change the channel number.

4) Press OK to confirm.

If a recording is too short, it is possible that a DVD player cannot detect it. Please observe the following 'minimum recording times'. Recording mode : {M1} – 5 minutes, {M2}– 10 minutes, {M2x} – 13 minutes, {M3} – 15 minutes, {M4} – 20 minutes, {M6} – 30 minutes, {M8} - 30 minutes.

Some DVD players cannot playback DVD+RW recordings.

You can solve this problem by using a special function :

1)Press OPEN/CLOSE on the DVD recorder to open the disc tray.

2)Insert the disc but do not close the tray.

3)Hold down the number button {2} on the remote control until the tray closes. The disc is modified.

4)If this fails to produce the desired result, repeat the procedure using the number button {3} on the remote control.

5)You can restore the disc to its original condition by pressing and holding number button {1}.

Warning! There is a risk that you can no longer play the disc on other DVD players after the following procedure. Therefore, apply this function with particular care.

E n g l i s h

63

3139 246 13454

1DVDR6xx_Eng00_13454c

63

9/28/04, 1:26 PM

Page 65
Image 65
Philips DVDR612 Troubleshooting cont’d, Problem, Solution, If the DVD recorder cannot read the disc, you cannot record