Perle Systems 5500208-41 manual Set IOChannel Mode, Set IOChannel Digital I/O

Set IOChannel

Set IOChannel

Set IOChannel Mode

Description	Sets general I/O channel settings for the specified channel, these settings are available
User Level	to all channels and I/O serial pins.
	Admin
Syntax	set iochannel <i/o_channel> [mode enableddisabled]
	[description <string>]
Options	i/o_channel
	Specify the channel number, for example, d2 or a4. Temperature models use Analog
	input, so the channel numbers are a1-a4.
	mode
	Enables the channel, allowing the settings to become active.
	description
	Provide a description of the channel, making it easier to identify. The channel
	description can be up to 20 characters.

Set IOChannel Digital I/O

Description	Sets up the Digital I/O channel to act as either an output or input channel.
User Level	Admin
Syntax	set iochannel <digital_channel> source-type inputoutput
Options	digital_channel
	Specify the Digital channel number, for example, d2.
	source-type
	Specify whether the channel will drive the line (output) or will be reading the status of
	the line (input). The default is Input. The internal jumpers must match the software
	configuration, so if you change this setting to Output, you will have to also change the
	internal hardware jumpers.

Set IOChannel Digital Input

Description Sets the Digital input settings for the channel.

User Level Admin

Syntax set iochannel <digital_channel>

[alarm [trigger disabledinactive-inputactive-input] [clear automanual] [syslog onoff] [snmp onoff]]

[description <string>] [invert-signal onoff]

[latch disabledinactive-to-activeactive-to-inactive]

Options digital_channel

Specify the Digital channel number, for example, d2.

alarm

Configures alarm settings when the Digital input trigger is activated.

79