Add Custom-IPv6, Set Custom-IPv6 | Perle Systems 5500208-41 guide

IPv6 Commands

Add Custom-IPv6

Description	Adds a custom IPv6 address to the IOLAN. You can specify either a complete IPv6
User Level	address or an IPv6 network address.
User Level	Admin
Syntax	add custom-ipv6 method auto network-prefix <network_prefix>
	[prefix-bits <0-64>]
	add custom-ipv6 method manual ipv6-address <ipv6_address>
	[prefix-bits <0-128>]
Options	method auto
	When this option is specified, the IOLAN will derive an IPv6 address from the entered
	network prefix and the IOLAN’s MAC address. This is the default option.
	network-prefix
	Specify the IPv6 network prefix. The IOLAN will derive the complete IPv6 address
	from the entered network prefix and the IOLAN’s MAC address.
	prefix-bits (auto)
	Specify the network prefix bits for the IPv6 address.
	Range: 0-64
	Default: 64
	method manual
	Specify this option when you want to enter a specific IPv6 address.
	ipv6-address
	Specify the complete IPv6 address.
	Field Format: IPv6 address
	prefix-bits (manual)
	Specify the network prefix bits for the IPv6 address.
	Range: 0-128
	Default: 64

Set Custom-IPv6

Description	Configures custom IPv6 network and IP addresses.
User Level	Admin
Syntax	set custom-ipv6 <config_ipv6_address> method auto
	network-prefix <network_prefix> [prefix-bits <0-64>]
	set custom-ipv6 <config_ipv6_address> method manual
	ipv6-address <ipv6_address> [prefix-bits <0-128>]
Options	method auto
	When this option is specified, the IOLAN will derive an IPv6 address from the entered
	network prefix and the IOLAN’s MAC address. This is the default option.
	network-prefix
	Specify the IPv6 network prefix. The IOLAN will derive the complete IPv6 address
	from the entered network prefix and the IOLAN’s MAC address.

24	IOLAN DS1/TS2 CLI Reference Guide, Version 4.1

Image 24

Perle Systems 5500208-41 manual Add Custom-IPv6, Set Custom-IPv6

Contents

Iolan DS1/TS2 EN 55022 1998, Class A, Note Table of Contents User Commands Line Commands Network Commands Time Commands Statistic Commands Channel Control Commands Glossary Iolan DS1/TS2 CLI Reference Guide, Version Preface About This BookIntended Audience Contacting Technical Support Making a Technical Support Query Repair Procedure Feedback on this Manual Contacting Technical Support Command Syntax IntroductionIntroduction CLI Conventions Command Shortcuts Command Options Server Commands Server CommandsSet Custom-App Set Server Bypass-password Dhcp/bootpOem-login Password-limit Set Service TimeoutPrompt-with-name Single-telnet Hardware Commands Modbus Commands Set Modbus Gateway TruePort Baud Commands User Level AdminSet TruePort Remap-Baud Show TruePort IPv6 Commands Set IPv6Show IPv6 Add Custom-IPv6 Set Custom-IPv6 Range Default 64 method manual Range DefaultDelete Custom-IPv6 Field Format IPv6 address prefix-bits manual IPv6 Commands User Commands Commands for Users Logged Into the Iolan Menu PingResume Screen Set User Set User Session Show Line Users Syslog ConsoleShow Sessions Show Termtype Telnet Tcpport Configuring Users Set Default UserVersion Add User Hotkey-prefix Level Line-access ServiceSess-timer Phone-number Set User Level Show Default User ConfigureduserShow the settings for the specified user Show the settings for the current user Configuring Users Line Commands Port vs -Port Line CommandsLine Commands Set Line Break-delay Dial-timeoutOptions break Break-length Data-loggin InitialInitiate-connection Internet-address Reset Default Disabled Session stringsDefault 10 ms Lock Stop-bits Term-typeTerm1, Term2, Term3 user defined terminals User Set Line Interface Set Line Service ConfighostServerport Hostport Set Modem ModemnameInitstring Line Service Commands Show Line Set Telnet-Client Options termtype Set UDP OutboundportStartipaddress Endipaddress Set Vmodem Set Vmodem-Phone Set Modbus-Slave Line Set Modbus-Master LineIPaddress Set Multihost Line Set Line Initiate-Connection Show Interface Show Telnet-ClientShow UDP Show Vmodem Modem Commands Add ModemDelete Modem Show Modems Packet Forwarding Commands Set Packet-Forwarding Line Enable-end-trigger1 Enable-end-trigger2Enable-end-eof1 Enable-end-eof2 Show Packet-Forwarding Line Packet Forwarding Commands Network Commands Chapter Snmp CommandsAdd Community Add Trap Delete Community Delete TrapSet Snmp Show Snmp Tftp Commands Hosts Commands Gateway Commands Show HostsAdd Gateway Delete Gateway Description Configures the gateway User Level Admin Syntax Set GatewayShow Gateways Destinationip Logging Commands Set SyslogShow Syslog Time Commands Time CommandsTime/Date Setting Commands Show Date Administration Commands Bootup Commands Set Bootup Show BootupConfiguration file Show ARP Tftp File Transfer Commands NetloadHostname/ipaddress Filename Custom Factory Default Options Factory-default-configNetsave Table or a DNS server Motd Commands SetSet Motd Show Motd Motd Commands Statistic Commands Chapter Configuration StatisticsShow Netstat Show Modbus Statistics Run-Time Statistics O Commands Global I/O CommandsSet IO UDP Set IO Temperature-Scale Set LineSet IO Failsafe Set IO Modbus Set IOChannel Mode Set IOChannelSet IOChannel Digital I/O Set IOChannel Digital Input Set IOChannel Digital Input Serial Pins Current status. The default is disabled Set IOChannel Digital OutputDescription can be up to 20 characters Will be displayed as active Active-signal-width Inactive-signal-widthActive-to-inactive-delay Inactive-to-active-delay Set IOChannel Digital Output Serial Pins Set IOChannel RelayOptions description Relaynumber Set IOChannel Analog True Analog Options analogchannel Trigger-type Trigger-levelClear-mode Clear-level Set IOChannel Analog Temperature Level Enabled Default Disabled keepaliveSet IOChannel IOExtension Options channel Client-initiated tcp-port Client-initiated multihostServer-initiated tcp-port Local-connection inputchannel Set IOChannel Multihost Show IOChannel StatusKill IOChannel Channel Show IO Show IOChannel Channel Control Commands Digital OutputDigital Input Relay Glossary