Motd Commands, Set Motd, Show Motd | Perle Systems 5500208-41

MOTD Commands

Set

Description	Sets the current configuration on IOLAN to act as the factory default configuration. See
	the User Guide for directions on how to revert back to the original factory default
User Level	configuration, if required.
User Level	Admin
Syntax	set config-to-factory-default

MOTD Commands

Set MOTD

Description	Specifies the server/file that contains the message of the day (MOTD) that is displayed
	when users log into the IOLAN. You can also retrieve the MOTD from a local file (it
	must already be downloaded to the IOLAN using the netload customapp-file
User Level	command); to do this, do not specify the host parameter.
User Level	Normal, Admin
Syntax	set motd [display onoff] [host <hostname> file <path_filename>]
	set motd file <local_file>
Options	display
	When enabled, displays the Message of the Day to users who are logging into
	WebManager or EasyPort Web. The default is off.
	host
	The host that the IOLAN will be getting the Message of the Day file from.
	<path_filename>
	The path and file name (do not use a drive letter), relative to the default path of your
	TFTP server software, of the file that contains a string that is displayed when a user
	connects to the IOLAN.
	<local_file>
	This is the name of a file already downloaded to the IOLAN. The contents of this file
	will be used for the MOTD.

Show MOTD

Description	Show the Message of the Day (MOTD) settings.
User Level	Admin
Syntax	show motd

73

Image 73

Perle Systems 5500208-41 manual Motd Commands, Set Motd, Show Motd

Contents

Iolan DS1/TS2 EN 55022 1998, Class A, Note Table of Contents User Commands Line Commands Network Commands Time Commands Statistic Commands Glossary Channel Control Commands Iolan DS1/TS2 CLI Reference Guide, Version About This Book PrefaceIntended Audience Making a Technical Support Query Contacting Technical Support Feedback on this Manual Repair Procedure Contacting Technical Support Introduction Command SyntaxIntroduction CLI Conventions Command Options Command Shortcuts Server Commands Server CommandsSet Custom-App Set Server Dhcp/bootp Bypass-passwordOem-login Password-limit Timeout Set ServicePrompt-with-name Single-telnet Hardware Commands Set Modbus Gateway Modbus Commands User Level Admin TruePort Baud CommandsSet TruePort Remap-Baud Show TruePort Set IPv6 IPv6 CommandsShow IPv6 Set Custom-IPv6 Add Custom-IPv6 Range Default Range Default 64 method manualDelete Custom-IPv6 Field Format IPv6 address prefix-bits manual IPv6 Commands Commands for Users Logged Into the Iolan User Commands Ping MenuResume Screen Set User Session Set User Syslog Console Show Line UsersShow Sessions Show Termtype Tcpport Telnet Set Default User Configuring UsersVersion Add User Level Hotkey-prefix Service Line-accessSess-timer Phone-number Set User Level Configureduser Show Default UserShow the settings for the specified user Show the settings for the current user Configuring Users Port vs -Port Line Commands Line CommandsLine Commands Set Line Dial-timeout Break-delayOptions break Break-length Initial Data-logginInitiate-connection Internet-address Default Disabled Session strings ResetDefault 10 ms Lock Term-type Stop-bitsTerm1, Term2, Term3 user defined terminals User Set Line Interface Confighost Set Line ServiceServerport Hostport Modemname Set ModemInitstring Show Line Line Service Commands Options termtype Set Telnet-Client Outboundport Set UDPStartipaddress Endipaddress Set Vmodem Set Vmodem-Phone Set Modbus-Master Line Set Modbus-Slave LineIPaddress Set Line Initiate-Connection Set Multihost Line Show Telnet-Client Show InterfaceShow UDP Show Vmodem Add Modem Modem CommandsDelete Modem Show Modems Set Packet-Forwarding Line Packet Forwarding Commands Enable-end-trigger2 Enable-end-trigger1Enable-end-eof1 Enable-end-eof2 Show Packet-Forwarding Line Packet Forwarding Commands Snmp Commands Network Commands ChapterAdd Community Add Trap Delete Trap Delete CommunitySet Snmp Show Snmp Hosts Commands Tftp Commands Show Hosts Gateway CommandsAdd Gateway Delete Gateway Set Gateway Description Configures the gateway User Level Admin SyntaxShow Gateways Destinationip Set Syslog Logging CommandsShow Syslog Time Commands Time CommandsTime/Date Setting Commands Show Date Bootup Commands Administration Commands Show Bootup Set BootupConfiguration file Show ARP Netload Tftp File Transfer CommandsHostname/ipaddress Filename Options Factory-default-config Custom Factory DefaultNetsave Table or a DNS server Set Motd CommandsSet Motd Show Motd Motd Commands Configuration Statistics Statistic Commands ChapterShow Netstat Show Modbus Statistics Run-Time Statistics Global I/O Commands O CommandsSet IO UDP Set Line Set IO Temperature-ScaleSet IO Failsafe Set IO Modbus Set IOChannel Set IOChannel ModeSet IOChannel Digital I/O Set IOChannel Digital Input Set IOChannel Digital Input Serial Pins Set IOChannel Digital Output Current status. The default is disabledDescription can be up to 20 characters Will be displayed as active Inactive-signal-width Active-signal-widthActive-to-inactive-delay Inactive-to-active-delay Set IOChannel Relay Set IOChannel Digital Output Serial PinsOptions description Relaynumber Options analogchannel Set IOChannel Analog True Analog Trigger-level Trigger-typeClear-mode Clear-level Set IOChannel Analog Temperature Level Default Disabled keepalive EnabledSet IOChannel IOExtension Options channel Client-initiated multihost Client-initiated tcp-portServer-initiated tcp-port Local-connection inputchannel Show IOChannel Status Set IOChannel MultihostKill IOChannel Channel Show IOChannel Show IO Digital Output Channel Control CommandsDigital Input Relay Glossary