This chapter defines all the CLI commands associated with configuring the IOLAN’s line parameters.
1-Port vs. 2-Port Line Commands
If you are using a DS1 IOLAN, the admin user does not have the option of using the number or all
(*)options in the line commands, as there is only one line. In an TS2 IOLAN, the admin user must specify . (current line), <number> (line number), or * (sets value for all lines) when configuring lines.
Line Commands
Set Line
Description | Configures line parameters. |
User Level | Admin |
Syntax | set line .<number>* [data-bits 5678] [break onoff] |
[break-delay <0-65535>] [break-length <0-65535>] [connection-method dial-indial-outdial-in-outdirect-connect] [idle-timer <0-4294967>] [line-name <name>]
[modem-name <config_modem>] [pages 1234567]
[parity noneevenoddmarkspace] [phone-number <phone_number>] [rev-sess-security onoff] [send-name onoff] [session-strings delay <0-65535> initiate <text> terminate <text>] [sess-timer <0-4294967>]
[stop-bits 121.5] [termtype wyse60vt100ansidumbtvi925 ibm3151tevt320hp700term1term2term3]
Admin set line ... flowin onoff] [flowout onoff] [hotkey-prefix <00-7f>] [data-logging onoff]
[initiate-connection any-charspecific-char <hex_value>] [initial climenu] [keepalive onoff] [lock onoff] [mode enableddisabled][motd onoff] [reset onoff] [dial-timeout <number>] [dial-retries <number>] [single-character onoff] [user <name>] [nouser] [internet-address <IPv4_address>] [user <config_user>]
IOLAN DS1/TS2 CLI Reference Guide, Version 4.1 | 39 |
