Filename [DVS3EU_2-EN.fm]
Masterpage:Left
38 EN
Page 38 October 8, 2001 2:37 pm
TIMER RECORDING (cont.)
Express Timer
Programming
If you do not know the SHOWVIEW number for the programme
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
ATurn on the recorder.
Press 1.
BLoad a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
CSelect the deck.
Press VHS or DV.
DAccess the SHOWVIEW screen.
Press PROG.
EAccess the Programme screen.
The front display panel looks like this:
FEnter the programme start time.
The front display panel looks like this:
GEnter the programme stop time.
Press STOP+/– to enter the time you want recording to
stop.
●Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
Before performing Express Timer Programming:
●Make sure that the recorder’s built-in clock is set properly.
●Turn on the TV and select the AV mode.
123
456
789
1
2
1
2
3
0
3
4
4
Press START+/–. (If you’re
just starting out, “P1”
appears.)
Press START+/– to enter the
time you want recording to
start.
●Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
DVS3EU_2-EN.fm Page 38 Monday, October 8, 2001 2:43 PM