Filename [DVS3EU_3-EN.fm]
Masterpage:Left
60 EN
Page 60 October 8, 2001 2:37 pm
REMOTE CONTROL
Remote Control
Functions
Remote A/B/C/D Code Switching
The remote control is capable of controlling four JVC video
recorders independently. Each of recorders can respond to one
of four codes (A, B, C or D). The remote control is preset to send
A code signals because your video recorder is initially set to
respond to A code signals. You can easily modify your video
recorder to respond to B, C or D code signals.
On the remote control
ADisplay the code.
Press and hold VHS or DV on the remote control for over
2 seconds. The code currently set blinks on the LCD
panel.
BChange the remote control code.
Press the number key “1” for A, “2” for B, “3” for C or “4”
for D.
CSet the remote control code.
Press OK to set the code.
On the recorder
DDisplay the code.
Press 4 on the recorder for over 5 seconds while the
recorder is turned off. The code currently set appears on
the front display panel.
●If the code displayed on the front display panel is different
from the code set on the remote control, go to step 5.
EChange the recorder’s code.
Press 8 on the remote control. The code currently set on
the remote control will be applied to the recorder.
NOTE:
When “POWER SAVE” is set to “ON” (墌pg.69), it is
impossible to change the remote code.
123
456
789
1
2
1
2
3
0
3
4
4
LCD panel
132
DVS3EU_3-EN.fm Page 60 Monday, October 8, 2001 2:40 PM