JVC HR-DVS3EU specifications 28 EN, Retake, Receiving Stereo and Bilingual Programmes

28 EN PLAYBACK/RECORDING ON VHS DECK (cont.)

Retake

You can cut out unnecessary parts of a TV programme while you are recording it.

End of programme		Beginning of programme
Programme	Unnecessary	Unnecessary	Programme
	part	part

Recorded part

Go back to end of programme to cut out unnecessary part

1Engage the Record-Pause mode.

Press 9 during recording.

2Locate the start point.

Turn the JOG dial to the left or right (or hold down 3 or 5) and release it when you reach the point where you want to resume recording.

●Your recorder returns to the Record-Pause mode.

3Resume recording.

Press 4 when you wish to resume recording.

NOTE:

Retake function does not work during Direct Rec ( pg. 19, 69).

Receiving Stereo and Bilingual Programmes

Your recorder is equipped with a Sound-Multiplex decoder (A2) and a Digital stereo sound decoder (NICAM) making reception of stereo and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being received will be displayed on the TV screen for a few seconds.

Type of Broadcast Being		On-screen Display
Received
A2	Stereo	ST
A2	Bilingual	BIL.
Regular Monaural		(none)
NICAM Stereo		ST NICAM
NICAM Bilingual		BIL. NICAM
NICAM Monaural		NICAM

●To listen to a stereo programme, press AUDIO until “HIFI L jhR” appears on the TV screen.

●To listen to a bilingual programme, press AUDIO until “HIFI L j” or “HIFI hR” appears on the TV screen.

●To listen to the standard (Regular Monaural) audio while receiving a NICAM broadcast, press AUDIO until “NORM” appears on the front display panel or the TV screen.

NOTE:

“O.S.D.” must be set to “ON” or the on-screen displays will not appear ( pg. 69).

To Record Stereo and Bilingual Programmes (A2)

Stereo programmes are automatically recorded in stereo on the Hi-Fi audio track (with the normal audio track recording mixed L and R channel sound).

●Bilingual programmes are automatically recorded in bilingual on the Hi-Fi audio track. The main soundtrack will be recorded on the normal audio track.

To Record NICAM Stereo and Bilingual Programmes

The NICAM audio programme will be recorded on the Hi-Fi audio track, and the standard audio programme will be recorded on the normal audio track.

NOTES:

●If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.

●Before playing back a programme recorded in stereo, or a bilingual programme, refer to “Soundtrack Selection” on page 25.