JVC LPT1092-001A manual VHS DVD Cancel Showview Timer Enter Return, Clear

TIMER RECORDING EN 29

1 Press DVD or VHS to select the deck on which you want to

SHOWVIEW™ Timer Programming perform timer programming.

2 For DVD deck Load a recordable disc.

You can programme each deck to timer-record as many as 8 programmes up to 30 days ahead.

With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise.

You can use the remote control to enter the SHOWVIEW number.

●Make sure that the unit’s built-in clock is set properly.

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

VHS

DVD

0 – 9

CANCEL

SHOWVIEW TIMER

ENTER

RETURN

CLEAR ( )

IMPORTANT:

If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong channel number will be displayed on the SHOWVIEW programme screen in step 5. When this happens, set the correct Guide Program number for that station. ( pg. 83, “SHOWVIEWTM System Setup”)

For VHS deck

Load a cassette with safety tab intact.

3Press SHOWVIEW to access the SHOWVIEW screen.

4 Press the number buttons to	SHOWVIEW PRGM
enter the SHOWVIEW number of a	SHOWVIEW NO.	1 2 3 4
programme you wish to record,	DATE	START	STOP	TV PROG
then press ENTER.

● If you have made a mistake, press		DAILY/WEEKLY VPS/PDC			REC MODE
CANCEL and input the correct
				ON	NAME
					SP
number before you press ENTER.	1	2	3	OK	ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
● To clear all entered numbers at a
	4	5	6
					THEN PRESS [ENTER]
	7	8	9
time, press CLEAR (8).		0

●If the number you entered is

invalid, “SHOWVIEW NO. ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears on the TV screen. Input a valid SHOWVIEW number.

●If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen, set Guide Program numbers manually. ( pg. 83)

●When “PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME” appears on the TV screen, you need to cancel some of the reserved programmes. ( pg. 34)

5The SHOWVIEW number you entered and the matching timer- recording information are displayed on the TV screen. Check the programme data.

● To cancel this setting, press RETURN.

IMPORTANT:

Make sure the channel position number you wish to record is displayed; if not, see “SHOWVIEWTM System Setup” ( pg. 83) and set the Guide Program number correctly.

6 Press w e to select the desired recording option as required. Press rt to select the desired setting, then press ENTER.

●“STOP” (To advance/go back the stop time by 30 minutes, press and hold rt).

●“DAILY/WEEKLY” ( pg. 30, “Weekly/Daily Recording”)

●“VPS/PDC” ( pg. 30, “VPS/PDC Recording”)

●“REC MODE” ( pg. 27, 28, “Recording Mode”)

●“NAME” ( pg. 67, “Modify Title Name”) (DVD deck only)

7 Press ENTER to access the Programme Confirmation screen.

8 Press ENTER to complete timer programming.

●To programme another timer, repeat steps 3 – 8.

●If “PROGRAMME OVERLAPPED” appears on the TV screen, see page 35.

9Press TIMER # to engage the unit’s timer mode. The DVD timer indicator lights up on the unit and the unit is automatically turned off.

Satellite Receiver Users (DVD Deck Only)

To timer-record a satellite broadcast using the SHOWVIEW system:

APerform “SHOWVIEW™ Timer Programming”.

BSet the satellite receiver to the appropriate channel before the selected programme begins.

C Leave the satellite receiver’s power on.

NOTES:

●To disengage the timer mode, press TIMER # again.

●There may be cases that the SHOWVIEW Timer Programming function prolongs the stop time of the programming.

●When two successive programmes are recorded on a DVD-RW disc with the SHOWVIEW Timer Programming function, the beginning of the second one may be left off the recording.

●SHOWVIEW Timer Programming is not possible on the discs used exclusively for On-Disc Timer Programming.

●If the copy limited programme is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed.

●To record the programmes received by the satellite receiver, record on the DVD discs. For details, refer to “Satellite Receiver Users (DVD Deck Only)” above.