36 EN TIMER RECORDING

 

Automatic Satellite Programme

 

Make sure the satellite receiver is connected to the unit’s [L-2 IN/

 

 

DECODER] connector.

 

Recording (DVD Deck Only)

 

Programme the timer on the satellite receiver.

 

 

Slide the TV/DVD switch to DVD.

 

 

 

 

 

 

 

 

 

 

 

1 Load a recordable disc.

This function allows you to automatically record a satellite

 

programme which is timer-programmed on your external satellite

 

2 Press DVD so that the DVD lamp lights up on the unit.

receiver. Connect a satellite receiver to the unit’s [L-2 IN/

 

3 Press REC MODE repeatedly to set the recording mode.

DECODER] connector and programme the timer on the satellite

 

 

4 Press and hold SAT # for about 2 seconds to engage the

receiver. The unit starts or stops recording by the signals input

 

from the satellite receiver. After recording, the unit’s power shuts

 

Automatic Satellite Programme Recording mode. “SAT #

off automatically.

 

appears on the front display panel.

 

 

 

 

 

 

 

 

 

 

 

NOTES:

ATTENTION:

 

To disengage the Automatic Satellite Programme Recording mode,

Be sure not to turn on the satellite receiver before the programme

 

press SAT #.

 

 

is executed; otherwise, the unit will start recording when the

 

If the unit’s power is off, it is not possible to engage the Automatic

 

 

satellite receiver’s power is turned on.

 

Satellite Programme Recording mode.

If you have connected another appliance other than a satellite

 

For timer programming of the satellite receiver, refer to the instruction

 

 

receiver to the [L-2 IN/DECODER] connector, be sure not to

 

manual of the satellite receiver.

 

 

engage the Automatic Satellite Programme Recording mode;

 

Automatic Satellite Programme Recording is not possible if your

 

 

otherwise, the unit will start recording when the connected

 

satellite receiver does not have a timer.

 

 

appliance’s power is turned on.

 

Pressing the unit’s 1 button while Automatic Satellite Programme

Automatic Satellite Programme Recording and timer-recording

 

Recording is in progress turns off the unit’s power and disengages

 

 

cannot be done at the same time.

 

the Automatic Satellite Programme Recording mode.

 

 

 

 

 

 

 

 

 

 

 

If there are more than one satellite programmes you wish to record

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

with Automatic Satellite Programme Recording, it is not possible to

 

 

 

 

 

 

 

 

 

 

 

set different recording modes for each programme.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Depending on the type of satellite receiver, the unit may not record a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

slight portion of the beginning of the programme or may record

 

 

 

 

 

 

 

 

 

 

 

slightly longer than the actual length of the programme.

 

 

 

 

 

DVD

 

Just Clock ( pg. 88) does not work when the Automatic Satellite

 

 

 

 

 

 

Programme Recording mode is engaged.

 

 

 

 

 

 

 

 

 

 

 

You can also record a programme from your cable system in the

 

 

 

 

 

 

 

 

 

 

 

same way if the system has a timer.

SAT

REC MODE

Page 36
Image 36
JVC LPT1092-001A manual Recording DVD Deck Only, Sat, REC Mode