DISPLAY SET OTHERS
VIDEO IN/OUT RECORDING SET
VIDEO IN/OUT RECORDING SET DISPLAY SET OTHERS
DVD SET UP FUNCTION SET UP INITIAL SET UP
DVD SET UP FUNCTION SET UP INITIAL SET UP

EDITING EN 45

L-2 Select Setting

F-1 Input Setting

Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the unit’s [L-2 IN/DECODER] connector.

1Perform steps 1 and 2 of “L-1 Output And L-1 Input Setting” ( pg. 44).

2Press rt to select “L-2 SELECT”, then press ENTER.

3 Press rt to select the appropriate setting, then press

ENTER.

 

 

 

 

 

 

 

 

MONITOR TYPE

 

 

4:3LB

 

 

4 Press SET UP to complete the

 

 

 

 

 

 

 

 

 

F-1 INPUT

 

 

 

VIDEO

 

 

 

 

 

 

 

 

 

 

 

L-1 INPUT

 

 

 

VIDEO

 

 

setting.

 

 

 

 

 

 

 

 

L-1 OUTPUT

 

SCART VIDEO

 

 

 

 

 

 

 

 

 

 

 

NOTES:

 

 

 

 

 

VIDEO/RGB

 

 

L-2 SELECT

 

 

S-VIDEO/RGB

 

 

 

 

 

 

 

 

SET UP

OK

 

 

SAT VIDEO/RGB

 

 

If “L-2 SELECT” is set to

SELECT

WITH [CURSORS]

 

 

 

 

 

 

 

DECODER

 

EXIT

SELECT

THEN PRESS [ENTER]

 

“S-VIDEO/RGB”, it is not possible

 

 

 

 

 

 

 

 

 

 

 

 

 

to output colour signals correctly from the VHS deck.

If “L-2 SELECT” is set to “DECODER”, only the DVD deck operates properly.

* The boldface settings below indicate the settings at your purchase.

8L-2 SELECT VIDEO/RGB / S-VIDEO/RGB /

SAT VIDEO/RGB / DECODER

Select “VIDEO/RGB” or “S-VIDEO/RGB” to use this unit as the recording deck with the player connected to the [L-2 IN/ DECODER] connector, or to use the satellite receiver connected to the [L-2 IN/DECODER] connector.

VIDEO/RGB: If a connected appliance’s output is compatible with regular video signals, set to “VIDEO/RGB”.

S-VIDEO/RGB: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO/RGB”. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

Select “SAT VIDEO/RGB” to view a satellite programme with the TV set while the unit is turned off. ( pg. 76)

SAT VIDEO/RGB: If a connected satellite receiver’s output is compatible with regular video signals, set to “SAT VIDEO/RGB”.

DECODER: To use a decoder connected to the [L-2 IN/DECODER] connector.

NOTES:

If you have a satellite receiver or a decoder connected to the [L-2 IN/ DECODER] connector, be sure to set “L-2 SELECT” back to appropriate mode after editing.

If you are not connecting a satellite receiver or a decoder to the [L-2 IN/DECODER] connector, leave “L-2 SELECT” set to “VIDEO/RGB”.

When “L-2 SELECT” is set to “SAT VIDEO/RGB”, “SAT” appears on the TV screen or front display panel instead of “L-2”.

If “L-1 OUTPUT” is set to “SCART S-VIDEO”, it is not possible to set “L-2 SELECT” to “DECODER” or “SAT VIDEO/RGB”.

If “L-1 OUTPUT” is set to “SCART RGB”, it is not possible to set “L-2 SELECT” to “DECODER”.

If “L-1 OUTPUT” is set to “COMPONENT” and “L-2 SELECT” to “SAT VIDEO/RGB” or “DECODER”, be sure to connect the [L-1 IN/OUT] connector with a TV.

If “L-2 SELECT” is set to “S-VIDEO/RGB”, the monochrome signal is output from VHS deck. Be sure to select setting other than “S-VIDEO/RGB” when you use the VHS deck.

Set “F-1 INPUT” to the appropriate mode depending on the connector ([VIDEO] or [S-VIDEO]) being used on the front panel.

1 Perform steps 1 and 2 of “L-1 Output And L-1 Input Setting” ( pg. 44).

2Press rt to select “F-1 INPUT”, then press ENTER.

3 Press rt to select the appropriate setting, then press

ENTER.

MONITOR TYPE

4:3LB

4 Press SET UP to complete the

F-1 INPUT

 

VIDEO

L-1 INPUT

 

VIDEO

setting.

 

S-VIDEO

L-1 OUTPUT

SCART VIDEO

 

L-2 SELECT

VIDEO/RGB

* The boldface settings below

SET UP

OK

SELECT WITH [CURSORS]

indicate the settings at your

EXIT

SELECT

THEN PRESS [ENTER]

 

purchase.

8F-1 INPUT VIDEO / S-VIDEO

VIDEO: When connecting an appliance to the [VIDEO] input connector, set to “VIDEO”.

S-VIDEO: When connecting an appliance to the [S-VIDEO] input connector, set to “S-VIDEO”.

NOTE:

If “F-1 INPUT” is set to “S-VIDEO”, the monochrome signal is output from VHS deck. Be sure to select “VIDEO” when you use the VHS deck.

Page 45
Image 45
JVC LPT1092-001A manual Select Setting, Input Setting