JVC LPT1092-001A manual Perfect Connections Recommended, Simple Connections

76 EN SYSTEM CONNECTIONS

	Connecting To A Satellite Receiver	Perfect Connections (Recommended)
This is an example of recommended connections if your TV
Simple Connections		has two 21-pin AV input (SCART) connectors.
		Connect the decoder to the satellite receiver’s connector if you
This is an example of a simple connection if your TV has one		have a decoder, [L-1IN/OUT] connector to TV’s connector, and [L-
21-pin AV input (SCART) connector.		2 IN/DECODER] connector to the satellite receiver’s connector.
Connect the satellite receiver to the [L-2 IN/DECODER] connector,		Then connect the satellite receiver and TV.
then connect the [L-1 IN/OUT] connector to the TV’s connector.		NOTES:

NOTES:

●Set “L-2 SELECT” to “VIDEO/RGB” or “S-VIDEO/RGB”. ( pg. 45)

●You can use the Automatic Satellite Programme Recording function ( pg. 36) with this connection. (DVD deck only)

●To record a programme via the satellite receiver, select L-2 mode by pressing PR +/– so that “L-2” appears on the front display panel.

●For details, refer to the instruction manual of the satellite receiver.

● Set “L-2 SELECT” to “VIDEO/RGB” or “S-VIDEO/RGB”. ( pg. 45)

● You can use the Automatic Satellite Programme Recording function

( pg. 36) with this connection. (DVD deck only)

● To record a programme via the satellite receiver, select L-2 mode by

pressing PR +/– so that “L-2” appears on the front display panel.

● To receive a scrambled broadcast, descramble the signal with the

decoder connected to the satellite receiver.

● For details, refer to the instruction manual of the satellite receiver and

Outdoor unit

Satellite cable

Satellite receiver

Aerial

TV aerial cable

ANTENNA IN

ANTENNA OUT

decoder.

Outdoor unit	Aerial
Satellite cable	TV aerial cable

Satellite receiver

ANTENNA IN

ANTENNA OUT

TV

Decoder

TV

IMPORTANT

When you set “L-2 SELECT” to “SAT VIDEO/RGB” ( pg. 45), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV/VIDEO on the remote control to turn off the video indicator ( ) on the unit.

●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VIDEO on the remote control to set the unit to the AV mode.