48 EN ADVANCED PLAYBACK

MARK

TOP MENU ENTER

MENU

SLOW – () SLOW + ()

REMAIN

ANGLE

SUBTITLE

Resume Function

It is possible to memorise the position where you stop playback and resume playback from that position.

Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 80)

1 Press 8 during playback to memorise a resume point.

The unit enters Resume Stop mode and memorises the position where you have stopped playback as a resume point. (The inside of the disc status indicator on the front display panel blinks while memorising.)

The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected if “RESUME” is set to “DISC RESUME”. ( pg. 80)

To clear the resume points:

(The inside of the disc status indicator stops blinking and lights.)

When “RESUME” is set to “ON”:

Press 1 to turn off the unit.

Press x (OPEN/CLOSE) to take out the disc.

Press 8 in stop mode.

Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

Press MENU to display the disc menu, then start playback by selecting an item, etc.

When “RESUME” is set to “DISC RESUME”:

Set “RESUME” to “OFF”. ( pg. 80)

Press 8 in stop mode.

Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

Press MENU to display the disc menu, then start playback by selecting an item, etc.

Still Picture/Frame-By-Frame Playback

1 Press 9 to pause during playback.

2Press 9 repeatedly to activate frame-by-frame playback.

Each press of w or e advances/reverses the still picture frame by frame.

Frame-by-frame playback for reverse direction cannot be performed with Video CD discs.

To resume normal playback, press 4.

Slow Motion

1 Press 9 to pause during playback.

2Press SLOW – (3) or SLOW + (5).

Each press of SLOW – (3) or SLOW + (5) increases the slow motion speed for each direction (from 1/16 to 1/2 times the normal speed).

Slow motion for reverse direction cannot be performed with Video CD discs.

2 Press 4 in stop mode to resume playback. The unit starts playback from the resume point.

NOTES:

“DISC RESUME” setting works on DVD VIDEO, VCD and already finalised DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under “ON” setting will be applied even if “RESUME” is set to “DISC RESUME”. ( pg. 80)

If you stop the playback of a disc for which a resume point has already been memorised, the memory will be updated with the new resume point.

After the unit has memorised the resume points for 30 discs, remembering a new resume point will cause the unit to delete the oldest memorised point. Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored. This may potentially change the order in which points are deleted.

When the unit memorises a resume point for a disc, it also remembers audio language, subtitle and angle settings.

This function may not work for some Video CDs.

When “RESUME” is changed to “ON” or “OFF” ( pg. 80), resume points of the discs memorised with “RESUME” set to “DISC RESUME” will be cleared.

Resume points are memorised for each side of a double-sided disc.

Skip Search

During playback, press .

Each press initiates an approximately 30-second period of fast- motion playback. Normal playback resumes automatically.

Page 48
Image 48
JVC LPT1092-001A manual Resume Function, Still Picture/Frame-By-Frame Playback, Slow Motion, Skip Search