78 EN SUBSIDIARY SETTINGS
Mode Set (DVD Deck)
* The boldface settings below indicate the settings at your purchase.
AUDIO OUTPUT
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/DVD switch to DVD.
DVD
8DIGITAL AUDIO OUT — DOLBY DIGITAL / PCM / STREAM /
PCM / PCM ONLY
Set to the appropriate mode according to the type of the device connected to [DIGITAL AUDIO OUTPUT] connector.
DOLBY DIGITAL/PCM: Select this when you connect the digital input connector of a Dolby Digital Decoder or an amplifier with a
STREAM/PCM: Select this when you connect the digital input connector of an amplifier with a
PCM ONLY: Select this when you connect the linear PCM digital input of other audio equipment (amplifier, MD or DAT deck, etc.).
NOTE:
If you watch or play back a title which contains multiple audio languages, select “PCM ONLY” in advance and choose main or sub audio with AUDIO.
ENTER
rtwe
8ANALOG AUDIO OUT — STEREO / DOLBY SURROUND
Select the appropriate setting to accommodate the unit to the connected A/V equipment. This function takes effect when a DVD VIDEO disc is played back.
STEREO: Select this when listening to conventional
DOLBY SURROUND: Select this when listening to multichannel surround audio with the unit’s [AUDIO OUTPUT] connectors connected to an amplifier/receiver with a
SET UP
Various modes of this unit are categorised into menus nested in 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 78 through 80), then follow the procedure below.
DVD SET UP | LANGUAGE SET ( pg. 20) |
| AUDIO OUTPUT ( pg. 78) |
| UTILITY ( pg. 89, 90) |
|
|
FUNCTION SET UP | VIDEO IN/OUT ( pg. 21, 44) |
| RECORDING SET ( pg. 79) |
| DISPLAY SET ( pg. 79) |
| OTHERS ( pg. 80) |
|
|
INITIAL SET UP | AUTO CH SET ( pg. 84) |
| MANUAL CH SET ( pg. 85) |
| GUIDE PR ( pg. 83) |
| CLOCK SET ( pg. 88) |
●The procedure below shows how to set the desired option of the “AUDIO REC” mode as an example.
1 Press DVD so that the DVD lamp lights up on the unit. 2 Press SET UP to access the Main Menu screen.
3 Press w e to select “FUNCTION SET UP”, then press t.
4 Press w e to select “RECORDING SET”, then press t.
5 Press rt to select “AUDIO |
| SAVE AS LIBRARY |
|
| ON |
| |
|
|
|
|
|
|
| |
REC”, then press ENTER. |
| XP MODE REC AUDIO |
| DOLBY DIGITAL |
| ||
|
|
|
|
|
|
| |
| AUDIO REC |
|
| NICAM1/MAIN |
| ||
6 Press rt to select the desired |
|
|
|
|
| NICAM1/MAIN |
|
| DIRECT REC |
|
| NICAM2/SUB |
| ||
option, then press ENTER. |
|
|
|
|
| MONO |
|
| INPUT COLOUR SYSTEM |
|
|
| |||
|
|
|
|
|
|
| |
7 Press SET UP to complete the | SET UP | OK | SELECT WITH [CURSORS] | ||||
EXIT | SELECT | THEN PRESS [ENTER] | |||||
|
|
|
| ||||
8D. RANGE CONTROL — NORMAL / WIDE RANGE / TV
MODE
The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. NORMAL: Normally select this setting to activate this function. WIDE RANGE: Select this to deactivate this function when you
enjoy wide dynamic range programme.
TV MODE: Select this when you hear the sound through the TV’s speaker(s).
NOTES:
●This function has no effect on programmes other than that recorded in Dolby Digital format.
●The effect of “NORMAL” and “WIDE RANGE” may not be different depending on discs.
8OUTPUT LEVEL — STANDARD / LOW
You can lower the output level of analog audio to accommodate the unit to the connected A/V equipment.
STANDARD: Normally select this setting.
LOW: The output level of analog audio is lowered.
setting.
