82 EN SUBSIDIARY SETTINGS

 

 

 

Tray Lock (DVD Deck Only)

8 AUTO SP]LP TIMER — ON / OFF

When this function is set to “ON”, the unit automatically switches to

 

 

 

 

 

 

 

You can lock the disc tray to prohibit the unwanted disc ejection by

LP mode to allow complete recording if there is not enough tape to

 

record the entire programme while timer-recording in SP mode.

 

children.

For Example:

 

 

 

 

 

 

 

Turn off the unit.

Recording a programme of 140 minutes in length onto a 120-minute tape.

 

 

 

 

 

 

 

 

 

 

 

 

 

Approximately 100 minutes Approximately 40 minutes

 

 

 

 

 

 

 

 

 

 

 

 

 

SP mode

LP mode

Total 140 minutes

Make sure you set this function to “ON”, before the timer-recording starts.

NOTES:

If you have programmed the unit to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set “AUTO SP]LP TIMER” to “ON”. In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.

In order to ensure that the recording fits on the tape, this feature may leave a slight non-recorded section at the end of the tape.

There may be some noise and sound disturbance at the point on the tape where the unit switches from SP to LP mode.

The “AUTO SP]LP TIMER” feature is not available during ITR (Instant Timer Recording), and the feature will not work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-120.

STANDBY/ON

VHS

DVD

REC

 

 

VHS/DVD

PR

S-VIDEO

VIDEO

AUDIO

 

 

 

 

VHS

DUBBING

DVD

DV IN

To lock tray

While the unit is turned off, press and hold 8, then press x (OPEN/CLOSE) on the unit. “LOCK” appears on the front display panel and the disc tray is locked.

To unlock tray

While the unit is turned off, press and hold 8, then press x (OPEN/CLOSE) on the unit. “UNLOCK” appears on the front display panel.

8COLOUR SYSTEM PAL/NTSC / MESECAM

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this unit. Select the appropriate colour system.

*SECAM signals will be recorded as MESECAM on this unit; MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video cassette recorder.

PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.

MESECAM: To record SECAM signals, or play back a MESECAM tape.

NOTES:

About NTSC Playback

Some TVs shrink the picture vertically and place black bars at the top and bottom of the TV screen. This is not a malfunction on the part of either the unit or the TV.

The picture may roll up and down. This can be corrected using the V- HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

The counter and tape remaining time readings will be incorrect.

During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

Page 82
Image 82
JVC LPT1092-001A manual Tray Lock DVD Deck Only, For Example, To lock tray, To unlock tray, About Ntsc Playback