18 EN INITIAL SETTINGS

Preset Download

 

If you have connected the unit to your TV via a 21-pin SCART

 

cable ( pg. 15), the unit will automatically perform Preset

Auto Channel Set By Downloading From TV/Auto

Download instead of the Auto Set Up in step 4 on page 17. After

downloading, the unit sets the clock and Guide Program numbers

automatically.

 

 

 

Clock Set/Auto Guide Program Number Set

 

 

 

Slide the TV/DVD switch to DVD.

 

 

 

 

 

 

 

 

ATTENTION:

 

Perform steps 1 to 3 of “Auto Set Up” ( pg. 17) before continuing.

 

1 Press rt to select “T-V LINK” and press ENTER. The T-V

You can use this function only with a TV offering T-V Link, etc.* Be

sure to use a fully-wired 21-pin SCART cable.

 

LINK screen will appear, and the unit automatically performs Auto

* Compatible with TVs offering T-V Link, EasyLink, Megalogic,

Channel Set.

 

 

 

SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART

 

 

 

When Auto Channel Set is

 

 

 

cable. The degree of compatibility and available functions may differ by

INITIAL SET UP

 

 

completed, “PLEASE WAIT” will

 

 

system.

 

INITIAL SET UP / CHANNEL SET

 

 

be displayed for about 90

 

 

 

 

 

AUTO SET

 

 

 

 

seconds, since channel data is

T-V LINK

 

 

 

 

exchanged between the DVD

 

 

 

 

 

deck and the VHS deck. No

 

 

 

 

 

operation will be done during this

 

OK

 

 

 

time.

SET UP

SELECT WITH [CURSORS]

 

 

EXIT

SELECT

THEN PRESS [ENTER]

 

 

 

VHS

 

ATTENTION:

 

DVD

 

 

 

 

Preset positions on the front display

INITIAL SET UP

 

 

 

 

panel increase from “PR 1”; do NOT

INITIAL SET UP / CHANNEL SET

 

 

 

press any button on the unit or

AUTO SET

 

 

 

 

remote control until the front display

T-V LINK

 

 

 

 

panel shows clock time, “PR 1” or “–

 

PLEASE WAIT...

 

 

 

 

 

 

 

–:– –” as illustrated on page 19.

 

 

 

 

 

NOTES:

SET UP

OK

SELECT WITH [CURSORS]

 

 

For details, refer to the instruction

EXIT

SELECT

THEN PRESS [ENTER]

 

 

 

 

 

manual of your TV.

 

 

 

ENTER

 

In the area where no TV station transmits a PDC (Programme

 

Delivery Control) signal, the unit can perform neither Auto Clock Set

 

 

nor Auto Guide Program Number Set.

 

 

 

 

If there is a power cut, or if you press 1 or SET UP while

 

 

downloading or set up is in progress, it will be interrupted; be sure to

 

 

turn off the unit power once and try again from the beginning.

 

 

Auto Clock Set may not function properly depending on the reception

 

 

condition.

 

 

 

 

 

On this unit, the characters available for station names (ID) are A–Z,

 

 

0–9, –, f, + and I (space). Some names of downloaded stations

 

 

may differ from those of your TV. ( pg. 87)

 

 

After “Preset Download” is completed, perform “Monitor Set (DVD Deck Only)” on page 21.

SET UP

Page 18
Image 18
JVC LPT1092-001A manual Preset Download, Clock Set/Auto Guide Program Number Set