SUBSIDIARY SETTINGS EN 79
RECORDING SET
8SAVE AS LIBRARY — OFF / ON
When this function is set to “ON”, the recording information is automatically stored in the library. For details, refer to “Modify Library Information” ( pg. 71).
8XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP mode. When this function is set to “LINEAR PCM”, you can obtain a
DOLBY DIGITAL: To record in Dolby Digital format.
LINEAR PCM: To record in Linear PCM format.
8AUDIO REC — NICAM 1/MAIN / NICAM 2/SUB / MONO
You can select the desired NICAM audio channel to be recorded on a
NICAM 1/MAIN: To record the main language of NICAM audio.
NICAM 2/SUB: To record the sub language of NICAM audio.
MONO: To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8DIRECT REC — OFF / ON
When this function is set to “ON”, you can easily start recording the programme that you are watching on your TV. Press and hold 7 and press 4 on the remote control, or press 7 on the unit.
NOTES:
●When you use the Direct Rec function, be sure to use a TV offering
●If “DIRECT REC” is set to “OFF”, the 7 button functions as described in “Basic Recording (DVD)” ( pg. 26) or “Basic Recording (VHS)” ( pg. 28).
●During Direct Rec, “–
●If a programme is recorded with the Direct Rec, the station name will not be registered in the library. “– – –
●Even if there is no power supply for more than 60 minutes, the unit keeps the setting.
DISPLAY SET
8SUPERIMPOSE — OFF / AUTO
When this function is set to “AUTO”, various operational indicators appear on the TV screen. Messages appear in the selected language. ( pg. 20)
OFF: To turn off superimposed indications.
AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.
NOTES:
●Even when “SUPERIMPOSE” is set to “OFF”, you can display the various operational indicators by pressing ON SCREEN. To clear the operational indicators, press ON SCREEN again.
●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting.
●When you select “AUTO”, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.
8GREY/BLUE BACK — OFF / ON
When this function is set to “ON”, the TV screen becomes all grey (DVD deck)/blue (VHS deck) when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set this function to “OFF”.
8DIMMER — BRIGHT / DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel. BRIGHT: To turn on the light on the front display panel. (Blue lamp
on the front display panel is turned on.)
DIMMED1/DIMMED2: To change the brightness level. (Blue lamp on the front display panel is turned off.)
OFF: To turn off the light on the front display panel. (Blue lamp on the front display panel is turned off.)
8POWER SAVE — OFF / ON
When this function is set to “ON”, you can reduce the power consumption while the unit is turned off.
●During Power Save mode —
—the front display panel will be turned off.
—the Just Clock function ( pg. 88) does not work.
8INPUT COLOUR SYSTEM — AUTO / PAL / SECAM
You can play back PAL discs, or record PAL and SECAM signals on this unit. Select the appropriate colour system.
AUTO: Normally select “AUTO”. “AUTO” identifies the input signal and automatically switches to an appropriate colour system. When “AUTO” is not selected, you have to switch the colour system to an appropriate setting (PAL or SECAM) manually.
PAL: To record PAL signals.
SECAM: To record SECAM signals.
●Power Save does not work when —
—the unit is in the Timer mode.
—the unit’s power is turned off after
—the Automatic Satellite Programme Recording mode is engaged. ( pg. 36)
—
●It takes some time for the unit to complete initialisation after you turn on the unit power, with “HELLO” blinking on the front display panel.
8ON SCREEN LANGUAGE
This unit offers you the choice to view
For details, refer to
