CONNECTIONS

CONNECTING A PC

Connect the 15-pin D-SUB PC/VGA connector from your computer to the 15-pin D-SUB PC/VGA input on this unit using a monitor cable and an audio cable (not included) as shown.

Make sure you connect the cable from the computer (VGA and AUDIO - PC OUT) to this unit

(VGA and AUDIO - PC IN).

Connector

TOAUDIOOUTjacks

TOPC

 

TV REAR PANEL

2AV2

HDMI 3

HDMI 2

HDMI 1

1AV1

CONNECTING THE POWER CORD

You can power your TV unit by plugging the detachable AC power cord into the AC socket on the back of the unit and into a wall AC power outlet. Check that the rated voltage of your unit matches your local voltage. Make sure that the AC power cord is fully inserted into the unit.

NOTE

• Be sure the AC power cord is disconnected and all functions are off before making connections.

• Make sure that all the components are connected correctly.

• When you are not going to use the unit for a long period of time, disconnect the power cord.

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

• Mains plug is used as the disconnect device.

It shall remain readily operable and should not be obstructed during intended use.

To be completely disconnected the apparatus from supply mains, the mains plug of the apparatus shall be disconnected from the mains socket outlet completely.

TV REAR PANEL

2AV2

HDMI 3

HDMI 2

HDMI 1

1AV1

AC IN 120V

To AC 120V wall outlet

9

Page 13
Image 13
Curtis LCD3718A instruction manual Connecting a PC, Connecting the Power Cord