CONFIGURATION OF THE LCD
Note: generally, you can press MENU to return to previous menu, and EXIT to exit the menu, it is a default option.
POWER On/Off
Plug the TV into a standard outlet, making sure the output voltage and frequency corresponds to the requirement of your machine.
When the power supply is connected, the red indicator on the front panel will be on and the machine turns into standby state.
Push the POWER button on your remote control
the indicator on the front panel will change from red to green. And after several seconds, the system will enter the state previously selected when it was used last time.
When finish watching, push the POWER button on your remote control to return the TV to standby mode, The green light will change to red.
Unplug the power.
Installation Guide
- Press 
to select the OSD language, then press 
to select Auto Tuning.
Refer page 8 “Auto Tuning”.
