8.Remove the two screws securing the power distribution board to the chassis and lift the board out of the chassis.
Figure 40. Removing and Installing the Power Distribution Board
1.screws (2)
3.power supply cable to the
5.power distribution board
2.power supply cables to the system board (3)
4.standoffs (2)
6.fan cable connector
Installing The Power Distribution Board
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Align the power distribution board with the standoffs on the chassis.
2.Install the two screws that secure the power distribution board to the chassis.
3.Connect the power distribution cables to the system board and fan cable connector to the power distribution board.
4.Install the PDB shroud.
5.Close the system.
85
