Error Code | Message Information |
|
| LCD Message | Internal Dual SD Module <name> failed. Check SD Card. |
| Details | The SD card module is installed but improperly configured or |
|
| failed to initialize. |
| Action | Reinstall the SD module and remove and reinstall SD cards. |
RFM2006 | Message | Internal Dual SD Module <name> is write protected. |
| ||
| Details | The module is |
|
| to the media. |
| Action | If unintended, remove the media and disable write |
|
| protection. |
SEC0031 | Message | The chassis is open while the power is on. |
| ||
| LCD Message | Intrusion detected. Check chassis cover. |
| Details | The chassis is open. System performance may be degraded, |
|
| and security may be compromised. |
| Action | Close the chassis. Check system logs. |
SEC0033 | Message | The chassis is open while the power is off. |
| ||
| LCD Message | Intrusion detected. Check chassis cover. |
| Details | The chassis was opened while the power was off. System |
|
| security may have been compromised. |
| Action | Close the chassis and verify hardware inventory. Check |
|
| system logs. |
SEL0006 | Message | All event logging is disabled. |
| ||
| Details | This message is displayed when all event logging has been |
|
| disabled by the user. |
| Action | If unintended, |
SEL0008 | Message | Log is full. |
| ||
| Details | When the event log is full, additional events are not written |
|
| to the log. Older events may be overwritten and lost. This |
|
| message may also appear if the user disabled event logging. |
| Action | Backup and clear log. |
SEL0012 | Message | Could not create or initialize the system event log. |
|
125