OPERATING INSTRUCTIONS

PLAYING COMPACT DISCS

1.Press the POWER button to turn the unit on.

2.Open the CD compartment lid by pressing the CD Door OPEN/CLOSE area.

3.Insert a disc, label side up, into the compartment. Press the CD Door OPEN/CLOSE area to close the CD compartment lid; the total tracks will appear in the display.

4.Press the PLAY/PAUSE button to begin playback; the current track will appear in the display.

5.When the disc is through playing, it will stop. Press the STOP button to stop the disc before it is finished.

6.Press the POWER button to turn the CD off.

NOTES:

-If a disc is inserted incorrectly, dirty, damaged or not present at all, "no" will appear in the display.

-As each track is playback, the track number is shown in the display

-To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the disc to stop before opening the CD door. Never touch the lens when the CD compartment door is open.

-DO NOT use the carrying handle when playing a CD. The CD should only be used on a steady surface.

-This unit will play 3" CD singles, no adapter is needed.

-The maximum playing time is 74 minutes.

CD PAUSE CONTROL

1.During CD playback, if you wish to pause the disc momentarily, press the PLAY/PAUSE button. Playback stops but the disc continues to spin and the playback symbol blinks in the display.

2.Press the PLAY/PAUSE button again to release pause and resume normal CD playback.

5

Page 6
Image 6
Curtis RCD672 owner manual Playing Compact Discs, CD Pause Control