Curtis Mathes CMC13003 Chapter Five Special Features, Using Turbo Rewind, Using True Repeat

CHAPTER FIVE SPECIAL FEATURES

Viewing the Demonstration Mode

The Demonstration Mode displays all on-screen menus and programmable features.

1With the main menu on the screen, press CH until “VCR Setup” is highlighted.

2Press VOL+.

The VCR Setup screen is displayed.

3Press CH until “Demonstration” is highlighted.

4Press VOL+.

The TV/VCR cycles through the various menus and settings available.

5Follow the previous steps to turn off the Demonstration Mode.

Using Turbo Rewind

This product features Turbo Rewind, a high speed rewind mechanism that allows the user to rewind the tape in a shorter time period than normal. (T120 tape: within 100 seconds).

Note: The Turbo Rewind feature works only when rewinding the tape in stop mode.

You may experience a higher noise level when using this feature compared to standard rewind.

Using True Repeat
You can set your TV/VCR to		The TV/VCR will play the tape
automatically repeat a tape or a		until it reaches the end of the
section of tape. When you use		tape. Then, the TV/VCR will
True Repeat, your TV/VCR will		stop the tape, rewind it to the
play until it reaches the end of a		beginning, and begin playing
tape. Then, it will rewind to the		again.
beginning of the tape and begin		If the TV/VCR reaches an
playing again.
		unrecorded section of tape
1 With the VCR setup menu on		before it reaches the end, it
the screen, press CH or		will search forward and
CH until “True Repeat” is		check the tape again. If it
highlighted. Press VOL+ to		finds a recorded section of
turn True Repeat on.		tape, it will begin playing. If
		the tape is still blank, it will
		continue to search forward,
		until it reaches the end of the
		tape.
		4 Press STOP to end the
		repeat.
2 Press MENU twice to return
to normal viewing.
3 Insert and play a pre-
recorded video tape.
	CHAPTER FIVE: SPECIAL FEATURES		23