CyberHome Entertainment CH-DVD500 owner manual Back Panel Connectors

Back Panel Connectors

Connections on the Back Panel

The back panel is where you’ll find all the physical connections for the DVD Player. You will only use one Video and one Audio connection at any given time. For instance, if you’re using the Composite Video jack to connect to your TV, the S-Video and Component connectors will be unused.

Component Video Connectors	Dolby/DTS 5.1 Channel Outputs
	Connect to Dolby-Ready Receiver or
Y, Pr & Pb connectors for use with TVs	Speaker System.

compatible with Component Video and/or
Progressive Scan Video.				Ventilation Grill
Composite Video Connector				Allows hot air to flow from the unit. Make sure
				not to block when positioning the player.
Typical connection. Connect Yellow
cable to TV Video In.					AC Power Inlet
	Stereo Analog Audio Outputs				Insert the power cord here first.
					Then, plug other end to AC
	Use White/Red Audio Cable to connect
					Outlet (100-230V).
	to Audio In (L/R) of TV or Receiver.
Y			DTS/DOLBY 5.1CH DIRECT OUTPUT		AC SWITCH
	DIGITAL OUTPUT	ANALOG OUTPUT		CAUTION		ON
			FRONT SURROUND SUB WOOFER
				RISK OF ELECTRIC SHOCK	AC IN	I
Pb			R	DO NOT OPEN
	OPTICAL COAXIAL
VIDEO		R				O
OUT					100V-230V
Pr			L		CLASS 1 LASER 50Hz/60Hz	OFF
S-VIDEO		L			PRODUCT
OUT
			CENTER
VIDEOVIDEO	AUDIOAUDIO		VIDEOAUDIOAUDIO
	CoAxial Digital Audio Connector
	Use special CoAxial Digital Audio Cable to				AC Power Switch
	connect to Digital Receiver’s CoAxial Input.				Turns the main power OFF/ON. Must
					be set to ON for unit to operate.
	Optical Digital Audio Connector
	Use special Optical Digital Audio Cable to
	connect to Digital Receiver’s Optical Input.

S-Video Connector

Use special S-Video Cable to connect to TV’s S-Video In jack.

11