5.3Alarms
There are audible and visual alarm signals to alert the customer to abnormal and/or service affecting conditions present in the UPS.
Condition | Status LED | Alarm | Interface | Description | |
|
|
|
|
| |
| AC/DC Mode | No Audible | “ON Batt” |
| |
Normal | LED is | signal in low | Condition normal | ||
Alarm | |||||
| GREEN | state |
| ||
|
|
| |||
|
|
|
|
| |
| AC/DC Mode | Beeps twice | “ON Batt” | AC input failure; Battery is | |
On Battery | LED is | every 5 | signal in open | ||
supplying the power | |||||
| ORANGE | seconds | state | ||
|
| ||||
|
|
|
|
| |
|
|
| “Low Batt” | When the battery is nearly | |
|
| Beeps twice | depleted, the audible alarm | ||
Low Battery | N/A | signal in open | |||
every second | will beep twice every one | ||||
|
| state | |||
|
|
| second. | ||
|
|
|
| ||
|
|
|
|
| |
Battery | Missing | No Audible | “Missing Batt” | The Missing Battery LED | |
Battery LED | signal in open | will be illuminated due to a | |||
Missing | Alarm | ||||
On | state | missing battery. | |||
|
| ||||
|
|
|
|
| |
|
|
|
| The unit will perform a | |
|
|
|
| periodic battery test | |
| Missing |
| “Replace Batt” | automatically without | |
Replace | No Audible | disrupting operation. If the | |||
Battery LED | signal in open | ||||
Battery | Alarm | battery needs to be | |||
On (RED) | state | ||||
|
| replaced, the Missing | |||
|
|
|
| ||
|
|
|
| Battery LED will be | |
|
|
|
| illuminated. | |
|
|
|
|
| |
|
| Table 6: Alarms |
| ||
© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners. | Page: 15 of 17 |
