Write Cycle No CE Controlled16 | Cypress CY7C1018DV33 instruction

CY7C1018DV33

Write Cycle No. 1 (CE Controlled)[16, 17]

Notes

16.Data I/O is high impedance if OE = VIH.

17.If CE goes HIGH simultaneously with WE going HIGH, the output remains in a high-impedance state.

18.During this period the I/Os are in the output state and input signals should not be applied.

Document #: 38-05465 Rev. *D

Page 6 of 9

[+] Feedback

Image 6

Contents

Functional Description1 FeaturesLogic Block Diagram Cypress Semiconductor Corporation Selection Guide Maximum RatingsOperating Range Capacitance3 Thermal Resistance3AC Test Loads and Waveforms4 AC Switching Characteristics Over the Operating Range Parameter Description Industrial Unit Min Max Read CycleWrite Cycle 10 Data Retention Characteristics Over the Operating Range Switching WaveformsData Retention Waveform Data I/O Data Valid Write Cycle No CE Controlled16Write Cycle No WE Controlled, OE High During Write16 Data I/O Data in Valid Ordering Information 0-I/O Mode PowerTruth Table Write Cycle No WE Controlled, OE LOW11 Package Diagram Pin 300-Mil Molded SOJ Issue Date Orig. Description of Change Document History