CY7C1344H
Document #: 001-00211 Rev. *B Page 14 of 15
© Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsib ility f or the u se
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Intel and Pentium are registered trademarks and i486 is a trademark of Intel Corporation. All product and company names
mentioned in this document may be the trademarks of their respective holders.
Ordering Information
“Not all of the speed, package and temperature ranges are available. Please contact your local sales representative or
visit www.cypress.com for actual products offered”.
Speed
(MHz) Ordering Code Package
Diagram Package Type Operating
Range
133 CY7C1344H-133AXC 51-85050 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Commercial
CY7C1344H-133AXI 51-85050 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Industrial
100 CY7C1344H-100AXC 51-85050 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Commercial
CY7C1344H-100AXI 51-85050 100-pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Lead-Free Industrial
Package Diagram
NOTE:
1.JEDEC STD REF MS-026
2.BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH
MOLDPROTRUSION/END FLASH SHALL NOT EXCEED 0.0098 in (0.25 mm) PER SIDE
3.DIMENSIONS IN MILLIMETERS
BODYLENGTH DIMENSIONS ARE MAX PLASTIC BODY SIZE INCLUDING MOLD MISMATCH
0.30±0.08
0.65
20.00±0.10
22.00±0.20
1.40±0.05
12°±1°
1.60MAX.
0.05MIN.
0.60±0.15
0°MIN.
0.25
0°-7°
(8X)
STAND-OFF
R0.08 MIN.
TYP.
0.20MAX.
0.15MAX.
0.20MAX.
R0.08 MIN.
0.20MAX.
14.00±0.10
16.00±0.20
0.10
SEEDETAIL A
DETAIL

A

1
100
30
31 50
51
80
81
GAUGEPLANE
1.00REF.
0.20MIN.
SEATINGPLANE
100-pin TQFP (14 x 20 x 1.4 mm) (51-85050)
51-85050-*B
[+] Feedback