D-Link BEFCMU10 manual USB Type A, USB Type B, The USB CABLE Icon, Instant BroadbandTM Series

Models: BEFCMU10

1 17
Download 17 pages 58.05 Kb
Page 5
Image 5
The USB CABLE Icon

Instant BroadbandTM Series

The CableRear PanelModem with USB and Ethernet Connection’s Rear Panel

Cable Port The cable from your Internet Service Provider connects here. It is a round coaxial cable, exactly like the one that connects to the back of your cable box (if you have one), or like the one that probably connects your VCR to your tel- evision.

USB Port This port allows you to connect your Cable Modem to your PC using the included USB cable. Not all computers are able to use USB connections. For more information concerning USB and compatibility with your computer, see the next section.

Ethernet

Port This port allows you to connect your

Cable Modem to your PC or other

Ethernet network device using a UTP

Category 5 (or better) network cable.

Reset

Button Briefly pressing and holding in the Reset button allows you to clear the Cable Modem’s connections if there are any data “jams” and resets the Modem to the factory defaults. Continued or repeated pressing of this button is not recommended.

Power Port The Power port is where the included power adapter is connected to the Cable Modem.

EtherFast® Cable Modem with USB and Ethernet Connection

The USB CABLE Icon

The USB icon shown below marks a USB port on a PC or device.

To use this USB device, you must have Windows 98, 2000, or Millennium installed on your PC. If you do not have Windows 98, 2000, or Millennium, this device will not work.

Also, this device requires that a USB port is installed and enabled on your PC. Some PCs have a disabled USB port. If your port doesn’t seem to be working, there may be motherboard jumpers or a BIOS menu option that will enable the USB port. See your PC’s user guide for details.

Some motherboards have USB interfaces, but no ports. You should be able to install your own USB port and attach it to your PC’s motherboard using hard- ware purchased at most computer stores.

Your Cable Modem with USB and Ethernet Connection comes with a USB cable that has two different types of connectors. Type A, the master connector, is shaped like a rectangle and plugs into your PC’s USB port. Type B, the slave connector, resembles a square and connects to the USB port on the rear panel of your Cable Modem.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB Type A

 

USB Type B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is no USB Support on PCs run- ning Windows 95 or Windows NT.

4

5

Page 5
Image 5
D-Link BEFCMU10 manual USB Type A, USB Type B, The USB CABLE Icon, Instant BroadbandTM Series