Hardware Installation
1.Attach Wireless Antenna (Wireless Internet Camera only)
From the rear panel of the Internet Camera, screw the 2 external antennas that came with
2.Configure Network Communication (Wireless Internet Camera only)
From the rear panel of the Internet Camera select the desired network communication for the Internet Camera from the Slide Switch. Position the Slide Switch to the setting required for either LAN or LAN/ WLAN (Wireless Internet Camera only) position.
Please refer to the Physical Description section for detailed information.
3. Connect an Ethernet cable
Connect an Ethernet cable to the network cable connector located on the Internet Camera’s rear panel and attach it to the network.
4. Attach the external power supply
Attach the external power supply to the DC power input connector located on the Internet Camera’s rear panel and labeled DC 5V and connect it to your local power supply.
Note:
The LED indicator labeled Power will illuminate to indicate a proper connection to the power supply.
9
