Motion Detection (List View)

In the list view for the camera, a red circle preceeding the camera name indicates that the camera detected motion and is recording. The Camera will continue to record for 10 seconds after it has stopped detecting motion, then will stop recording. A new .AVI file will appear in your recording folder that you specified each time the camera is triggered to record. In the Camera menu, a check mark in front of Enable Motion indicates that the camera is detecting motion and is recording. You can manually disable motion detection by clicking on Stop and clicking on Enable Motion, which will remove the check mark.

To re-enable motion detection, simply click on Enable Motion and a check mark will appear to indicate that the camera is now set to record when it detects motion.

63

Page 63
Image 63
D-Link DCS-1000W manual Motion Detection List View