American Dynamics ADMPCPU manual Defining System Devices, Alarm Messages, Email Messages

–Dome – Enter a Camera Number (pseudo number) of a dome configured for input alarming (1-9999).

–Dome Input – Enter a value in the range of

1-4. This entry is the dome input alarm contact number.

–Video Loss Camera (range) – This column is read-only and displays any camera ranges that have a video loss contact set. These contact sets are configured in the Definitions – Cameras screen.

•Address 1 – Enter the Email address of the 1st person that you want the message to go to.

•Address 2 – Enter the Email address of the 2nd person that you want the message to go to.

•Address 3 – Enter the Email address of the 3rd person that you want the message to go to.

•Subject – Enter the subject text that you want to appears in the subject header of the Email message. The subject can contain a maximum of 16 characters.

•Body – Enter the text of the Email message.

Alarm Messages

The Alarms – Alarm Messages screen allows you to enter the text for an alarm message and assign a number to this alarm message. The alarm message can be up to 16 characters in length. The number assigned to the message can then be entered in the Alarm Messages field of the Alarms – Contact Definitions screen.

This message text appears on a monitor when the monitor is in an alarm state.

Figure 85. Alarms – alarm messages screen

Defining System

Devices

The definitions section of EASY CPU allows you to identify, define, and set up cameras, keyboards, satellite sites, and recording devices. Click on the Definition links in the Explore menu to begin.

Figure 87. Definitions links

Email Messages

The Alarms – Email Messages screen (Figure 86) allows you to create an Email message that can be sent to up to three Email addresses in the event of an alarm.

Figure 86. Alarms – Email messages screen

Complete the following fields:

•From Address – Enter the Email address of the account sending the Email.

•Number – Enter an identification number for the Email message.

Defining Cameras

The Definitions – Cameras screen allows you to create pseudo camera numbers, camera titles, and title positions on the monitor display. You can also identify the remote site that provides the video trunk to the selected local camera input, the remote monitor output, the type of camera, and its location.

Additionally, when you define cameras, you can also set up alarm contacts and Salvo call-ups.

Tool tips pop-up explanations appear whenever the cursor hovers over a column heading.

Click on the Definitions – Cameras link in the Explore menu to begin. The following screen appears.

•Host Name – Enter the IP address of the host Email server.

MEGAPOWER CPU	8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE	42 of 82