American Dynamics ADMPCPU 55-F2, 60-F2, 61-F2, 62-F2, 63-F2, 64-F2, 65-F2, 66-F2, 67-F2, 70-F2

Function	Action
	Entering this key combination implies that
55-F2	you will also enter another 2-digit F2 code
	combination within three seconds: 99-F2 -
	System Reset or 98-F2 – Reset to Factory
	Defaults
60-F2	Displays current day of week
61-F2	Sets day of week to Sunday
62-F2	Sets day of week to Monday
63-F2	Sets day of week to Tuesday
64-F2	Sets day of week to Wednesday
65-F2	Sets day of week to Thursday
66-F2	Sets day of week to Friday
67-F2	Sets day of week to Saturday
70-F2	Momentarily displays software version
	number as “V - - -” in the camera title field of
	the selected monitor
91-F2	Changes which unit is Active
	Writes app data (cameras selected on
92-F2	keyboards and other info) to Flash. Entering
	92-F2 ten seconds before a front panel reset
	eliminates the need to resynchronize
	cameras to monitors
93-F2	Loads the dynamically defined character set
	to the BVOM
	Used in combination with 55-F2 to reset the
98-F2	MPCPU to factory defaults, except the direct
	port settings. This function does nothing by
	itself.
99-F2	Used in combination with 55-F2 to reset the
	MPCPU. This function does nothing by itself.
100-F2	Sets video loss mode to OFF for the called
	camera
101-F2	Sets video loss mode to SYNC ONLY for
	camera
102-F2	Sets video loss mode to VIDEO LOW for
	camera
103-F2	Sets video loss mode to VIDEO MED for
	camera
104-F2	Sets video loss mode to VIDEO HIGH for
	camera
105-F2	Sets video loss mode automatically for
	called camera
106-F2	Sets DBVL mode for all cameras
	automatically and transfers settings to the
	CPUs to synchronize databases
107-F2	Updates video loss mode settings of all
	cameras from matrix switcher to the Video
	Loss Detection module
108-F2	Clears the video loss mode for all cameras

Function	Action
109-F2	Downloads video loss mode of called
	camera from VLD module to matrix switcher
	Transfers video loss mode of all cameras
110-F2
	from VLD module to matrix switcher
120-F2	End Pattern Definition
121-F2	Define Pattern 1
122-F2	Define Pattern 2
123-F2	Define Pattern 3
130-F2	Save New Pattern
131-F2	Clear Pattern 1
132-F2	Clear Pattern 2
133-F2	Clear Pattern 3
200-F2	Frees remote PTZ slots
202-F2	Resets all Alarms
300-F2	Displays current arming code for selected
	monitor
301-F2	SSI Monitor Arming(1)
302-F2	SSA Monitor Arming(1)
303-F2	SSM Monitor Arming(1)
304-F2	SHI Monitor Arming(1)
305-F2	SHA Monitor Arming(1)
306-F2	SHM Monitor Arming(1)
307-F2	BSI Monitor Arming(1)
308-F2	BSA Monitor Arming(1)
309-F2	BSM Monitor Arming(1)
310-F2	BHI Monitor Arming(1)
311-F2	BHA Monitor Arming(1)
312-F2	BHM Monitor Arming(1)
313-F2	DHI/DSI Monitor Arming(1)
314-F2	DHA/DSA Monitor Arming(1)
315-F2	DHM/DSM Monitor Arming(1)
316-F2	Disarm Monitor
317-F2	Enable Manual Override
318-F2	Disable Manual Override
998-F2	Transfer Macro from keyboard to system
999-F2	Transfer Macro from system to keyboard

Note:

(1)For an explanation of monitor arming codes, refer to APPENDIX I: Monitor Arming Codes on page 76.

MEGAPOWER CPU ADMINISTRATOR’S GUIDE

8200-0421-03, REV. G

70 of 82