![](/images/new-backgrounds/1203647/20364799x1.webp)
2.Click the Site Access tab. The selected keyboard number appears just below the tab in the keyboard field.
3.Click Add on the right side of the screen. The Add Sites dialog box appears.
Figure 102. Add Sites dialog
The Add Sites dialog provides three options. To select an option:
1.Click the button beside it and complete the required information. Options are:
−Replace with the following sequence – Enter a range of satellite sites; for example:
−Add a single Site – Click the up or down arrows to select a satellite site.
−Add a range of Sites – Click the up or down arrows on the “from” and “to” fields to select a range of satellite sites.
2.Click OK to save your site choices or Cancel to close the dialog box without saving your choices.
Removing Monitor or Site Access
To remove monitor or site access, do the following:
1.In the upper screen, click on the keyboard that contains the monitor to be deleted.
2.In the lower screen, click on the monitor or site access to be deleted, and then press Remove on the right side of the screen.
Configuring Keyboard/User Keyboards and Priorities
The Definitions – Keyboard/User Priorities screen allows the administrator to assign priority access levels to individual keyboards.
Priority levels determine whether the keyboard can perform special functions, such as camera lock, override, system reset, and others. You create priority levels within the Priority Settings tab on the Keyboard/Users Priorities screen.
Defining the Keyboard/User Keyboards Configuration
To define the Keyboard/User Priorities – Keyboards configuration, do the following:
1.Click on Keyboard/User Priorities link in the Explore menu to begin.
Important: Depending of the setting of the User Enable Logon checkbox in the System – Options dialog box, one of two screens will appear.
User Enable Logon checkbox settings:
−Unchecked – Figure 103 appears and permits assigning of keyboard priorities.
−Checked – Figure 104 appears and permits assigning of user priorities and passcodes.
Figure 103. Definitions – keyboard/user priorities keyboard setup screen
2.In the Keyboards tab, complete the following fields:
−Keyboard No. – Identifies the keyboard by its physical connection to the CPU.
−Priority – Identifies the priority level
MEGAPOWER CPU ADMINISTRATOR’S GUIDE
48 of 82